Hot Tub Parts of America

This Kit is a 1-1/2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 1 1/2" Coupler, 1 1/2"Slip X 1 1/2"Slip (6") of 1 1/2" Flex Pipe, (1) 1/4 Pint of Hot Blue Glue and (1) 1/4...

This 1.5 Horse Power 48 Frame Pump Wet End fits LX Jacuzzi or Sundance Brand 6500-090 , 6500-345 , 6500-357 , 6500-845 Pump Motors only that would be about 9.0 Amps at 230V or 14.0 Amps at 115v.....

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it...

This part is a 12" Piece of 1/2" Flex Pipe used with 1/2" Manifolds, Jet Bodies and other fittings......       740016011378,DW-17ST R , DW-17ST-ZD,89-555-1105,1...

You are Purchasing a 6" Piece of 1/2" Flex Pipe used with 1/2" Manifolds, Jet Bodies and other fittings...... The list on this part is $12.99.   We have done a lot of extra work...

This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (2) 1" Street x 3/4" Barb Couplers.. This Kit is used to connect your 3/4" pipe connection that is being replaced to a...

This Kit is a Set of (10) Replacement Diffusers for a 5"- 5 1/2" Wide Faced Storm Jet made by Waterway. These jet diffusers are removed by pulling the Jet face away from the duffuser and...

This kit is a Set of (10) Replacement Diffusers for a 3 1/2" to 4.10" Pentair Cyclone Jet made by Pentair. See the video for information on how to change the diffuser and how to determine whether...

This part is a Set of (10) SC-30 Buss or Cooper Bussman Fuse that is 1 5/8" Long X 3/8" wide found on many Balboa , Gecko, Hydroquip , ACC, Nuwave , Len Gordon , Spa Builders and more Brand Spa Hot...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label. It is...

You are buying a Set of (10) 1 1/2" Slip X 1 1/2"Slip Coupler PVC Plumbing Fittings. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1 1/2"...

This part is a Set of (10) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about...