Topside Controls (Control Buttons)

Balboa no longer makes this topside control, it has aged out. We recommend installing a new retro-fit control system like this one for example: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Heater, TP200T   Analog topside control...

We have (1) Brand New board left after it is sold That its the end of this board.. 2000 Value Replacement Board Replacement boards for 2000 Value systems that utilize a pressure switch. This board is compatible with Duplex Digital and Lite Duplex Digital...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

This part is sadly obsolete and there are no replacements.. This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons.....

This part includes the replacement box only. You Choose these packs based off of the original part number found on your pack label this part number is any of these: 3-72-7018 , 844259, 0602-221001 , 0602-221015, 0602-221022 or scroll down for more...

The VS300 circuit boards have been discontinued. We now send the VS501Z circuit board which has a few more receptacles but is the same otherwise in fit and programming. This part is a VS300 Board that operates (1) Pump and Light..If your board has this...

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. You can use this...

3 button Mini Oval topside control panel made by Balboa. This topside is also known as the VL200 and been used industry wide. This 3 button panel has a button for jets, light and temp up/Down. It measures 4-3/8" x 1-5/8" and requires a hole size of...

This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet...

You are purchasing a Balboa Board Fuse Repair Jumper for board soldered on fuses found on many Balboa Brand Spa Hot Tub Boards. This jumper features a fuse holder with a .5A replaceable Fuse that can be added to any soldered on board fuse that has been...

Balboa and HydroQuip have discontinued this Lite Leader based system. See below for two retro-fit options Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Remote Heater, TP200T Retrofit MODPACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v...