Topside Controls (Control Buttons)

No longer available. Please see Balboas new retro-for replacement system here: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit Complete control system with a 15" long...

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater Jumper Strap to connect the heater to the circuit board on Balboa EL, GL, and Value systems. 2 required.   Heater Part...

This part is a Balboa SUV Board.. There are many part numbers you will find on your old board to cross to this board..One thing that goes wrong with this particular board is the transformer tabs or fingers will break in two causing the board not to power...

Universal Balboa circuit board used to replace many OEM boards that are discontinued. This board will give you all the same functionality as your original. Only differences may be default set temp, default filtration cycle settings etc. Can replace...

This topside is obsolete. We recommend installing a new retro-fit system like this: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Remote Heater, TP200T Balboa 2 button Lite Digital topside control made for many Lite Leader control...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

This part is a Relay, Closed Style, T-90 Type, 12vdc, Coil, 30 AmpCircuit board mounted. Use to complete simple circuit board repair. Action Coil Amps SPST 12 VDC 30amp Coil Voltage Type DC Relay/Contactor Style Relay Pole/Throw Single Pole...

This part is an Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval This small oval label fits the Eco-1 4-button panel  Manufacturer HydroQuip Model Eco-1 # of Buttons 4 Part Type Overlay

The following circuit board(s) are compatible with the above topside: 59-138-1037, 59-138-1046, 59-138-1680, 59-138-1683Overlay part number 58-138-1255

This M-1 54091 circuit board is obsolete. You will need to move to a retro-fit control system. Duplex Digital and Super Digital/M-1 Replacement BoardsThis board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa...

This relay is No Longer Available.. T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair Action Coil Amps SPST 18 VDC 30amp