1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Wet End,  Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP Wet End,  Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
    Add to Cart

    Wet End, Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP

    MSRP: $127.99
    $104.99
    This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v
    Add to Cart

    Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v

    MSRP: $129.99
    $114.99
    This part is a Complete FMHP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V...
    MSRP: $129.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $129.99
    $114.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
This is a 48 Frame Wet End and the Thru-Bolts are about 5 1/4" apart in a cross pattern and 3 5/8" Side to Side....Also the bolt heads on the thru-bolts are 1/4" on a 48 frame motor..IF your bolt heads are 5/16" you have a 56fr motor and this wet end will not work.. Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
    Add to Cart

    Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v

    MSRP: $129.99
    $114.99
    This part is a Complete FMHP 2.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 10.0 Amps on High Speed on a...
    MSRP: $129.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $129.99
    $114.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
    Add to Cart

    Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v

    MSRP: $129.99
    $114.99
    This part is a Complete FMHP 1.5HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High Speed on a 230V...
    MSRP: $129.99
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $129.99
    $114.99
    Subtotal:
  • Wear Ring, fits AquaFlo, FMHP, FMCP, TMCP, pump impellers, 1 3/4" hole Wear Ring, fits AquaFlo, FMHP, FMCP, TMCP, pump impellers, 1 3/4" hole
    Add to Cart

    Wear Ring, fits AquaFlo, FMHP, FMCP, TMCP, pump impellers, 1 3/4" hole

    MSRP: $10.99
    $8.99
    This part is a replacement wear ring found in 48 frame 1 1/2" Flo-Master "FMHP" Series Side Discharge and "FMCP" Center Discharge Spa Pumps.. The ring measures about 1 3/4" inside the wear ring and 2 3/16" at the widest part and about 3/4" tall....
    MSRP: $10.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $10.99
    $8.99
    Subtotal:
  • Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP, 91693551 Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP, 91693551
    Add to Cart

    Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP

    MSRP: $44.99
    $34.99
    This is a .75HP or 3/4HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .75HP Motor that has about 7.0 Amps on High Speed at 230V and 7-8.0 Amps at 115V. This Impeller fits between the Face and the...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • Impeller, Aqua-Flo, FMHP 1 1/2" Side, FMCP 1 1/2" Center or TMCP 1 1 /2" Bathtub Pump, 2.0HP Impeller, Aqua-Flo, FMHP 1 1/2" Side, FMCP 1 1/2" Center or TMCP 1 1 /2" Bathtub Pump, 2.0HP
    Add to Cart

    Impeller, Aqua-Flo, FMHP 1 1/2" Side, FMHP, FMCP, TMCP, FMVP, 2.0HP, 91693701

    MSRP: $44.99
    $34.99
    This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • Union Adapter, 2" Threaded Outside x 1-1/2" Threaded Inside, w/O-Ring This is where this adapter can be found in a Master Spa between the Circulation pump and a 2" Pump Union to adapt the 2" Pump Union down to a 1 1/2" Wet End Threaded fitting. 
Union Adapter, 2" Threaded Outside x 1-1/2" Threaded Inside, w/O-Ring
    Add to Cart

    Union Adapter, 2" Threaded Outside x 1-1/2" Threaded Inside, w/O-Ring

    MSRP: $17.63
    $13.99
    Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...
    MSRP: $17.63
    $13.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.63
    $13.99
    Subtotal:
  • Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins
    Add to Cart

    Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins

    MSRP: $13.99
    $11.99
    This part is a Pump Bleeder Barb with O-Ring that is found on some Aqua-Flo Xp2 and Xp2e wet ends but is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part does come with the...
    MSRP: $13.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $11.99
    Subtotal:
  • Impeller, Aqua-Flo FMHP, FMCP, TMCP, FMVP, 1.5HP Impeller, Aqua-Flo FMHP, FMCP, TMCP, FMVP, 1.5HP
    Add to Cart

    Impeller, Aqua-Flo FMHP, FMCP, TMCP, FMVP, 1.5HP

    MSRP: $44.99
    $34.99
    This is a 1.5HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1.5HP Motor that has about 9.0 Amps on High Speed at 230V and 14.0 Amps at 115V. This Impeller fits between the Face and the Volute of...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 1.0HP Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 1.0HP
    Add to Cart

    Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 1.0HP

    MSRP: $44.99
    $34.99
    This is a 1HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1HP Motor that has about 8.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends
    Add to Cart

    Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends

    MSRP: $28.99
    $18.99
    This Seal is a PS-3867 which is the Better - Viton Carbon Graphite version of the PS-200 Seal used Primarily in Aqua-Flo Wet Ends and Waterway "Viper" Wet Ends. It is 1 1/4" Across the back of the Spring Seal part that goes onto the Impeller and the...
    MSRP: $28.99
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $28.99
    $18.99
    Subtotal:
  • Total: items /

Adding your products to cart