1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, 1/15th HP Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, 1/15th HP

    Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, FMVP, 1/15th HP

    MSRP: $44.99
    $34.99
    This is a 1/15th HP Impeller for an Aqua-Flo Circulation Pump 48 Frame Side or Center Discharge CMHP, CMCP and FMVP Series Wet End. This Impeller fits between the Face and the Volute of an Aqua-Flo CMHP, CMCP and FMVP Series Wet End. I would advise...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • (2) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps (2) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps

    (2) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps

    MSRP: $49.99
    $39.99
    You are buying a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo...
    MSRP: $49.99
    $39.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $49.99
    $39.99
    Subtotal:
  • O-Ring, Aqua-Flo, FMCP, FMHP, TMCP, CMHP, 1-1/2" Face to Volute O-Ring

    O-Ring, Aqua-Flo, FMCP, FMHP, TMCP, CMHP, 1-1/2" Face to Volute O-Ring

    MSRP: $8.99
    $6.99
    This Face Plate O-Ring Is 5 1/8" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.5HP, 91693501 Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.5HP, 91693501

    Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.5HP, 91693501

    MSRP: $44.99
    $34.99
    This is a .5HP or 1/2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .5HP Motor that has about 6.0 Amps on High Speed at 230V and 6-7.0 Amps at 115V. This Impeller fits between the Face and the...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Pump..

    Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $9.99
    $6.99
    This part is a Air Bleeder barbed plug usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements with...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $12.99
    $8.99
    This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $12.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $8.99
    Subtotal:
  • Shaft Seal Kit, PS-200, 5/8" Shaft, Silicon & Tool Buna Fits Most Aqua-Flo Wet Ends Shaft Seal Kit, PS-200, 5/8" Shaft, Silicon & Tool Buna Fits Most Aqua-Flo Wet Ends

    Shaft Seal Kit, PS-200, 5/8" Shaft, Silicon & Tool Buna Fits Most Aqua-Flo Wet Ends

    MSRP: $14.99
    $12.99
    You are buying a Kit that Features (1) PS-200 Seal for Aqua-Flo Pumps and (1) 1/2Oz Tube of The Professor's Silly Juice a Specially Formulated for Hot Tubs Silicon Sealer. This Seal is Used Primarily in Aqua-Flo Wetends and in Waterway " Viper" Wet Ends...
    MSRP: $14.99
    $12.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $14.99
    $12.99
    Subtotal:
  • Shaft Seal, PS-1901, 5/8" Shaft, Silicon Carbide PS-200 (BEST) Shaft Seal, PS-1901, 5/8" Shaft, Silicon Carbide PS-200 (BEST)

    Shaft Seal, PS-1901, 5/8" Shaft, Silicon Carbide PS-200 (BEST) Fits Most Aqua-Flo Wet Ends

    MSRP: $81.99
    $61.99
    This Seal is The (BEST) Upgraded Salt Resistant Silicon Carbide Version a PS-200 Seal used Primarily in Aqua-Flo Wetends but is found in Waterway " Viper" & "EX2" Wetends and some others as well.. Silicon Carbide’s exceptional wear and...
    MSRP: $81.99
    $61.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $81.99
    $61.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete FMHP .75HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 7.0 Amps on High Speed on a 230V...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v Verticle Mount Pump 
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Note: This is not a Circulation pump wet end it is only for Jet pumps with 10.0Amps or more on high speed at 115V...

    Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v

    MSRP: $249.99
    $189.99
    This part is a Complete Verticle Mount Style FMVP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side discharge 48 frame wet end for FMVP pumps only. This wet end is used with a 48 frame motor that...
    MSRP: $249.99
    $189.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $249.99
    $189.99
    Subtotal:
  • Wet End,  Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP Wet End,  Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP
The Thru-Bolts are about 5 1/4" apart in a cross pattern and 3 5/8" Side to Side....

    Wet End, Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP

    MSRP: $127.99
    $104.99
    This part is a Complete Flo-Master FMCP 1HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Total: items /

Adding your products to cart