Pump Wet Ends and Related Parts

You are buying a 1 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump and Barb Kit complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Silicon & a Barb that you attach a 3/8" Bleeder line to. The difference between a 48 or 56 Frame...

You are buying a 5 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

You are buying a 1 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This item is a 3/4HP Waterway HiFlo Pump Impeller "B" Kit which included the Seal Kit as well.. If Your motor is 115V the amperage would be about 10 Amp if 230V it would be about 7 amps..Closed face impeller made for the HiFlo side discharge...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 2.5hp,which would be 10-11.0 Amps.. Click here for the Seal for this impeller Vico...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 4.0hp,which would be 13-14.0 Amps.. Click here for the Seal for this impeller Vico...

This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...

This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...

This is a 2.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...

This is a 2.0HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...

This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Impeller...

This 1.5 Horse Power Impeller, (2) Bearings & Seal Kit fits a 48 Frame Pump Wet Ends manufactured by Guangdong LX Brand only. The pumps this Impeller, Bearing & Seal Kit fits usually have the part number WUA-150, WP-150 or LP-150 on the label...