Pumps and Related Parts

This part is a (BEST) Silicon Carbide Salt Resistant Verison of a PS-1000 Seal. NOTE: This Seal does not fit a Waterway Viper or EX2 Wet End.. Silicon Carbide’s exceptional wear and chemical resistance, enhanced dry running capability and high...

This part is a Union that can be plumbed 2" Spigot x Spigot or 1 1/2" Slip x 1 1/2" Slip. This union is used in Pool plumbing to allow for quick removal of pumps,heaters,filters etc... This union can be plumbed with 2" plumbing which measures 2 3/8" ID...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2 1/2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This pump is 12 Amps.. Motor Voltage 230v Speed 2 Speed (2-Spd) Motor...

Waterway Hi-Flo Wet EndSide discharge, 2"mbt suction/discharge, 48 frame wet end for the Waterway Hi-Flo pump. This wet end is used with a 1.5hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The wet end may be...

1 Speed Rotating Switch

This Pump is a 48Frame 2115V 2 Speed with a 1.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 9.5A and low speed is 3.2 Amps....

You are buying a 4 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Complete 1HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V motor or 12.0 Amps...

This part is a Complete XP2e 6.3" 2HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2 pumps. This wet end is used with a 56 frame motor that would have about 10.0 Amps on High Speed on a 230V motor...

This item is a face is for a Sta-Rite DuraJet DJ pump... This face plate does come with the new style plugs in it.. Material Type Plastic Volute With Seal No Volute to Seal Plate Mounting Type 4 Bolts 4 Nuts Suction Connection...

This item is Air/Water Tubing, Vinyl, 3/8"id x 1/2"od, 100ft Roll Air Tubing Inside Diameter 3/8" Tubing Type Air/Water Air Tubing Outside Diameter 1/2" Manufacturer Waterway Tubing Inside Diameter (id) 3/8" Air...

Start Capacitor1-7/16"dia x 2-3/4"hgt