Pumps and Related Parts

This part is a 2.0HP Impeller fits some Jacuzzi, Sundance or Watkins Thermax Wet Ends only and would be found on a motor that is about 8.0 to 10.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on Jacuzzi...

This part is discontinued by the manufacturer.. This Part is a Power-Right Pump Face Plate only.. Related Parts: Impeller, Power-Right, 9089X/504, 2.5ohp/5spl Face Plate, Power-Right, Cal Spa, Power Right, Pump, Wet End, Volute, 5 Bolt, 2" X 2"...

You are Purchasing a 16" Piece of Acrylic found in many brands as an assist handle.. Some of the brands are Spa Crest , Caldera and Leisure Bay but there are others..

This part is a Used BN25 Pump Motor Face found on A.O. Smith, Century Lansar 48fr motors.... Note: This is a used part because there are no new offered without the complete motor..

This Part is a 1HP Impeller that fits an E-Series 48 Frame 1 1/2" Center discharge Wet End which is found in hot tubs some but on Above Ground pool pumps many times. This Impeller fits between the Face and the Volute of an E-Series Wet End. I...

This pump is a 6500-261 Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.5HP, 2SP, 230V that measures about 3" across the threads.. The amperage is about 11.0-12.0 Amps on high speed and 3.5 Amps on low speed and this pump will work as a one or speed pump....

This pump is a Replacement for a Laing or a New Style Grundfos Circulating Pump 230V with 3/4" Barbs found in many Jacuzzi® and Sundance® Hot Tubs... In my opinion this is a better pump than the Laing Brand... Spa...

This Pump is a 48Frame 115V 1 Speed with a 1.5-2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 2 5/16" across the threads...  This pump is designed to fit Dreamaker Spas with friction...

This part is a PUMP MOUNTING BRACKET FOR: 48 FRAME NPMM Pump, Jacuzzi / Sundance, Baseless, TheraFlo, . Note: This will Only Work in Jacuzzi and Sundance Hot Tubs that have a removable base and also use to rotate mote at a 45 degree angle.  DO NOT...

We do have these in stock!! This pump is a Pump, Jacuzzi / Sundance, Baseless, TheraFlo, 48FR, 1.5HP, 2SP, 115V that measures about 3" across the threads.. The amperage is 13.6 Amps on high speed and 3.6 Amps on low speed and this pump will work as a...

This pump is a rated 5HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...

This pump is a rated 4HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...