NLA Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,1.5hp, Sundance Jacuzzi J Series

This part is no longer available.

This 1.5HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 13.5 Amps at 115V or 9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on Jacuzzi Premium J Series Tubs and well as Sundance, I have seen these on HotSpring Tubs by Watkins and some other brands too... You need to look at the face to determine if this is your Wet End.. There are many times that the word Jacuzzi or Sundance is cast into the wet end face coming down from the Pressure Side outlet..

Note: This Impeller will not look like the original but will work in the housing.. Base your choice on the amperage in this case about 9.0 Amps...

Closed face impeller made for the Piranha series spa pump by Jacuzzi. Rated at 1.5hp, it is used in a Piranha pump body, and must be installed on a 1.5hp (or greater) thru bolt motor. Also used in Thera-Max and Thera-Flo pumps.

For Shaft seal options Click This Link

Impeller Type Closed Face

Impeller Diameter OD 3-7/8"

Vane Width ID 3/8"

Eye Diameter OD 3"

Eye Length 3/4"

Impeller Width OD 11/16"

Seal Seat Depth n/a

Shaft Length 1-5/8" 

Shaft Diameter OD 5/8"

Seal Seat Diameter OD n/a

Manufacturer Jacuzzi/Carvin

Pump Application Piranha