Parts by Group

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tube, Element, Pressure Switch, Split nuts, pigtail wires and Gaskets. The new version of this heater includes...

You are buying a 3 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

You are buying a 5 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your previous...

This Wear Ring only fits Waterway Executive 1, 2, or 3HP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 1-1/16" thick from front to back... If you have a Waterway Executive 4 or 5 Horsepower Wet End it will require a different wear ring that...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 4-5HP 56 frame 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3"...

This part is a Complete Jet Internal, Pentair, Cyclone Jet, 5" face diameter, Directional, 5 Scallop, Dark Gray.. This will replace Sundance Intelli-Jet LX, 1999-2002   Installation Type Twist Lock Face Diameter 5" Jet Part...

This parts is an Executive 2 1/2" Mpt Threaded Face plate assembly (Which will measure about 3 11/16" Across the Threads) less the O-rings, Screws, Bleeder Plugs and other hardware needed to attach it to the volute..There is another version of the face...

This Pump is a Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", 12.0A/3.5A.. The 2" x 2" Threaded fittings measure about 3" across the threads..  Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet...

This part is a 4 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be...

This Pump is a Waterway Executive, 2.0hp, 230v, 2-spd, 48fr, 2" x 2".. The 2" X 2" measures about 3" across the threads.. Spa Pump Features: Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet end for higher...

This part is a Balboa Heater Tube M7 Sensor Mount only. This Mount is screwed into the heater tube and the M7 sensor is slid down in the mount and screwed onto the mount. It DOES NOT include the tube or the sensor they are included in the pictures to...

This part is a Complete Jet Internal, Pentair, Cyclone Jet, 5" face diameter, 7 Hole Roto, Textured, Gray.. This will replace Sundance Intelli-Jet LX, 1999-2002   Installation Type Twist Lock Face Diameter 5" Jet Part...