Hot Tub Parts by Tub Brand

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is an O-Ring that is a square style for a Piranha pump and (2) 2 5/8" C to C for the pump unions found on Jacuzzi, Sundance, Hotspring and other brands as well...Part Type    Square RingO Reference Number  ...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This part is a 3 3/8" Wide Air Valve Clear LED Bezel that fits some Dynasty Air Valves. This parts has to thread onto the air control so keep in mind if your air control is plumbed in you will have to cut the plumbing to thread this on the air...

This pump is a 6500-264 Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.0HP, 2SP, 230V that measures about 3" across the threads.. The amperage is about 8.6 Amps on high speed and 3.0 Amps on low speed and this pump will work as a one or speed pump.. Note:...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This part is a 2 Part Oval Pillow that fits Jacuzzi Premium 2014+ J-300 Series.. This Pillow comes with Insert and is Gray & Silver.

This 90 Tee Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is not a Watkins Brand Part.. This Item is the 90 Ell found on the pressure side of a Laing pump...

This part is a Cartridge Filter 8" x 7" Wide 2" male pipe thread  32sqft found in some Artesian, Coleman or Maax Hot Tubs. This filter is 8" long x 7 " Wide. This filter has a threaded nipple that would measure about 2 3/8"...

This part is a 850 Series topside control manufacturered for Sundance/Jacuzzi tubs and will run 3 Pump System w/Blower. Keypad is a Trapezoid with LCD display and measures 12" x 4.7". 11 button overlay included (Temp+, Temp-, Invert, Light,...