Hot Tub Parts by Tub Brand

This part is a Circuit Board, Balboa, CAL SPAS 6200 CIRCUIT BOARD Replacement. 8 PIN PHONE STYLE CONNECTION. CHIP NUMBER: CS6200R1(X) - CS6100R1(X) This circuit board replaces the discontinued CS6200 and CS6100 circuit boards Please Note: Circuit boards...

This complete pump and motor is a Complete Pump, Sundance or Jacuzzi Theramax II, 06020191-1, 1.65HP, 115v or 230V, 17.0A or 8.5A, 48 frame, 2"x 2", 1 Speed.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 style pump and...

This complete pump and motor is a replacement for 36675-03.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this...

This part is a 230V Laing Circ pump That fits some Jacuaai Premium and Sundance tubs. This pump has 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater is compact and lightweight, less...

This part is a Circuit Board, Sundance/Jacuzzi, LX-10, Rev 3.56+, (1999 +), w/3 Big Relays, 1-Pump, w/Circ Pump. It will replace several different boards including but not limited...

This part is a Clear 50 Rib Buttress 3 1/2" Spa Diverter Cap only.  It measures 3 1/2" Edge to edge and the thread width is about 2 3/4" wide.. This Diverter Cap mounts on top of the Diverter Valve with the Stem sticking through then a...

This part is a Clear 18 Rib Orion 3 5/8" Spa Diverter Cap only.  This cap is thicker at 13/16" Thick and most caps are 23/32" thick.. It measures 3 5/8" Edge to edge and the thread width is about 2 3/4" wide.. This Diverter Cap mounts on top...

This part is a Sundance Spa Filter Cartridge with a 65sqft with a Castle Closed top, 2-1/16" Hole on bottom. It is 7-1/2" Wide x 14-3/4" Tall.. Diameter 7-1/2"  Length 14-3/4"  Bottom Style Open  Top Style Castle  Bottom...

This part is a Sundance or Jacuzzi, Hold Down: Filter Hook Assembly This part locks on the closed crown side of the filter to hold it in place while the open end is open locked into place by a thread nut..  For the filters and parts that...

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This part is a Graphite Gray Tri-Curve 9" wide x 6" Tall (2) Tabs that are about 6" center to center Hot Tub Neck Pillow This pillow fits some Four Winds, Infinity, Coast, Raindance and others. It has 2 snap tabs on the back that are...

This part is a Hour Glass Pillow Black, Four Winds, Genesys, Cal Spa, Coast Spa  It fits some Cal Spas, Master Spa, Coast, Genesys and Also Four Winds It is 4" Wide in the center and 4 5/8" on the ends and 8" Long at the widest point....