Hot Tub Parts by Tub Brand

Universal Rite-Fit Gecko Series heater assembly, 2.25”x 15”, 304SS, multiple PSI taps, adjustable cover plate, and adjustable studs. Includes 2”x2” tail pieces 2” ridged gaskets.   This heater will...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Aux, Light and to the right is Warm, Mode, Cool. This Overlay has an Adhesive back you...

This part is a Balboa 6 Button Overlay for a Topside for a Pump and Blower with Light System. On the overlay starting at the left of the readout it reads Jets, Blower, Light and Warm, Mode, Cool. This Overlay has an Adhesive back you simply clean the old...

This part is a bare Balboa 6 Button VL620 Topside for a Two Pump system with Light System. The VL620S topside control measures 7" x 3-7/16" and has a 7 foot cable with a phone jack style RJ45 plug. The overlay sticker for this topside control panel is...

This part is a 33-0612-08 replacement circuit board that operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump if equipped on some Artesian or South Seas Hot Tubs.. As of 2024 new VS501 circuit boards will come with the plug and...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" slip or 1" Street, Gray, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one...

This part is a South Seas Spas Overlay for a 7 Button Balboa Topside for 3 Pumps, and a Light.  The Button consist of  Jet 1, Jet 2, Jet 3, Light, Mode, Warm and Cool. This overlay has round ends and is 9 1/2"Long and 2 5/8"wide. The...

NOTE: This Overlay is Obsolete but we do have a generic Balboa Version we will ship you in place of this one that will work. See the second picture. This part is a Artesian Resort Series Overlay for a 7 Button Balboa Topside for 3 Pumps,...

This part is aNew Balboa MS1500 Spa Hot Tub Board found in Master Spa Brand hot tubs. MASTER SPAS CIRCUIT BOARD 8 PIN PHONE STYLE CONNECTION    CHIP NUMBER: MS1500R1(X)    REPLACES X801025   Below Is a List of related...

This New Old Stock part is a Complete Hot Tub Spa Part Clear 7 5/8" Waterfall Assembly 2 Hole Style Hole size is about 1" each.. You will get (2) 90 degree 1/2' Slip fittings with the waterfall.. If you need this waterfall to be barbed you will need 2...

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4oz can of glue to glue it all together. This valve is used above the water line to allow constant...

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...