Hot Tub Parts by Tub Brand

This heater is a flow through type heater. The heater is powered and controlled by the control box. Stainless steel tube with pressure taps. Additional Information Heater Type - Flow-Thru Heater Style - Flow-Thru Wattage - 4.0kW, Voltage -...

This Kit features a 2.5 Horse Power Impeller only that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand and are found on Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this impeller fits usually have the part...

This Item is an Eco Pur Filter for the Teleweir System on Master Spa Build tubs.. It is 5" Wide X 3 1/2" Tall on the cartridge and has a 1 1/2" SAE Threaded fitting that measure about 1 7/8" Edge to edge on the threads.. This filters works with some but...

This part is a Flow Switch Tee Housing with a Barb, Sundance and Jacuzzi Premium Replacement, 3/4" Barb x 3/4" Barb x 3/8" Barb..

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...

This part is a 5 1/8" JACUZZI® Premium 1" Barb Maxx Power Pro Jet Body that fits some 2002-2005 models..   April 2003 introduced a removable 1” bayonet eyeball, barb style Jet Back 6540-743 above.   We...

This 1.5 Horse Power 39583-03 13.8/3.8 Amp (2) Speed 48 Frame Complete Pump is a replacement Watkins Wavemaster LX Brand Pump. These pumps usually have the part number 39583-03 on the label for a Watkins Version. It is about 7 1/4"" across the face of...

This 1.5 Horse Power 13.8/3.8 Amp (2) Speed 48 Frame Complete Pump is a Guangdong LX Brand Pump. These pumps usually have the part number 48WUA1501C-II on the label for a Watkins Version. Watch the video for instruction on how to Identify...

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single Port.. To connect the valve to 3/4" plumbing simply glue...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa Heater M7 Sensor with a 46" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the...