Heaters and Related Parts

Heater assembly for the Gecko In.Ye, In.Xe and In.Yt spa packs and controls. This 4.0 KW flow thru heater includes the wiring, flow sensor and temperature probe along with gaskets and tailpieces. The unions on this heater are considered 2" bit will...

This part is a complete trombone heater found in some Jacuzzi Premium and Sundance Hot Tubs it is a 16.7AMP / 26" Length Trombone Style with Built in Thermal Switch. Used in Sundance/Jacuzzi Spa models:Sundance Portofino and Sweetwater Series2004+...

This heater is the exact generic replacement for the original Watkins No Fault 4000 HTP76228 heater...This model does not include a pressure switch. If you have a gray wire with a small white or red connector on it then you have a pressure switch which...

Dynasty Replacement Heater.Vertical heater assembly, 3" x 11" with 3/4" barb x 3/4" 90&deg barb inlet/outlets, 5.5kW/240v I have one of these left..  NO Longer Available Note: Therm Products the manufacturer of most hot tub heaters has gone...

This Part is a Cal Spa Retrofit M7 Style 5.5KW Heater Complete Assembly includes Tube, Element, M7 Sensors, Split nuts and Gaskets. This unit features a 5,5Kw Element, Tube with (2) M7 Sensors on either end with (2) Split Nuts and gaskets nut you will...

This part is a Cal Spa Original M7 Style 5.5KW Heater Complete Assembly includes Tube, Element Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets. This heater replaces the heater inside of the bottom of a Cal...

This part is a Complete Heater Tube and Element that fits Vita Spas build by DM Industries.. Stainless steel 5.5kW/230v, 2" x 17-3/4" flow thru replacement heater assembly with a pressure switch tap at 0 degrees from the heater terminals. Includes a...

This item is a Modified 2 1/2" Heater Union Tailpiece with a Pressure Switch Tap and Gasket that is used on may heater tubs that measure about 3" inside diameter of the tube.. It also has a 90 degree 1" Barb fitting.. This Union has had a Pressure Switch...

This part is a 2 1/2" Heater Split Nut with a Gasket which measures 3 9/16" Inside Diameter of the threads and 3" inside the ceneter part that wraps around a heater tube or body. The Heater Flange Split Nut mounts to the heater tube using 2 screws to...

This part is a 5.5KW UNIVERSAL Heater Complete Assembly includes Tube, Element, Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets.  This heater will work in place of the following heater: 10554 ,...

This heater has been discontinued. We recommend installing a retro-fit control system like these models: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Heater, TP200T Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW...

You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko MSPA Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets.I also offer the element only or the tub and element with no pressure switch...