Heaters and Related Parts

This part is a 5.5KW Titanium Heater Complete Assembly includes Tube, Element, Metal Case and connecting wires. This unit features a high limit holding tab and a port for the pressure switchThis...

This part is a 5.5KW Heater Complete Assembly includes Tube, Element, M7 Sensors, Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) M7 Sensors on either end with (2) Split...

This part is a 45° 2" Pump Union To Heater Connection Kit & Gasket. The Union glues into a 2" fitting on one side and then Screws to a 2" Wet End(Pump) Threaded Part on the

You are buying a Set of (2) 2" Heate

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a ga

This part is a Set of

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a ga

Sundance SpasVertical heater assembly 3-1/2" x 13" with 3/4" barb x 3/4" 90° barb inlet/outlets. Rated at 5.5kW/240v. Purchase of a foam wrap jacket is recommended when purchasing manifold

Cal Spas 1990-1994 New replacement 5.5 KW electric heater assembly for older Cal Spa control systems, such as the PS1-PS5 systems. The original heater had a 2 inch manifold that tapers down to 1.5...

This part is a Pump Union 2" Slip x 2" Female Thread with a 90 degree Sweep. The Threaded side Measures 3" Across Threads Inside Diameter and the slip side measures about 2 3/8" Inside Diameter....