Heaters and Related Parts

This part is a 5.5KW Sundance Sentry 850 / 750 Smart Heater Complete Assembly includes the Body, Element, Case and Manual Bimetallic Hi Limit with wires. This unit features a BiMetallic Backup high limit and the wires that tie to the board and is exactly...

This part is a 5"x 5" Flange Element 5.5kw at 230V or 1.375Kw at 115V with a Gasket, O-Ring and Bolts. This flanged element is found in Plastic Heater housings in Brett Aqualine, Premier  Allstate and Hot Water Products. I have also seen this...

This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures 2" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    EL,...

For a video about this part search YouTube for: Hot Tub Spa Parts Heater Union 2" X 1 1/2" Slip Information The Hot Tub Professor   You are buying a 1 1/2" Slip X 2" Heater Union Only...

This part is a 2 1/2" Heater Split Nut which measures 3 9/16" Inside Diameter of the threads and 3" inside the ceneter part that wraps around a heater tube or body. The Heater Flange Split Nut mounts to the heater tube using 2 screws to hold it in place...

This part is a 2 1/2" Therm Style Pump or Heater Union Gasket Only for use with a 2 1/2" Heater or Pump Union. If your heater or Pump is 2 1/2" this part could be correct we offer (2) different sizes of 2 1/2" gaskets so you need to verify your...

You are buying a 1 1/2" Heater Split Nut Only which includes the split nut and (2) Screws for use with a 1 1/2" Heater Union that would measure about 2 3/8" OD... The Heater Flange Split Nut mounts to the heater tube using 2 screws to hold it in...

This is a Flat Gasket for 2" Pump or Heater Union Extra Thick 1/4". It is a 2 7/8" Outside Diameter and 2 1/8" Inside Diameter.

You are buying on a 2" Slip X 2" Heater Union with Gasket. The Union receives a 2" pipe or fitting on one side that measures about 2 3/8" Outside Diameter and then Screws to a 2" Heater Flange Split Nut on the...

You are buying a 2" Heater Split Nut which includes the split nut and (2) Screws for use with a 2" Heater Union which would measure about 3" Edge to edge on the threads this split nut screws on. The Heater Flange Split Nut mounts to the heater tube...