Heaters and Related Parts

Balboa InstrumentsStainless steel replacement heater assembly. 2" x 15" manifold with1/8"npt pressure switch tap, does not include tailpieces

This part is a Heater, FloThru, Universal Fit, 15" x 2", 230v, 4.0kW..  This heater will work in place of the following heaters: 1563-08 , 20-00245 , 20-00317 , 20-00318 , 20-00319 , 20-00324 , 20-00433 , 20-00434 , 20-00454 , 26-0034 , 26-0036-R1C...

No Longer Available.. Leisure Bay&OthersVertical heater assy, 1" barb inlet/outlet same side, 3" x 9" dimensions, Rated at 5.5kW/240v. Similar to Hurricane except that the 1/8"npt pressure switch tap is located between the 1" ports and a temp...

This Kit features a 1 1/2" Threaded Split Nut that goes over the flange of a 1 1/2" Heater Flow Through style Tube... And a 1 1/2" Threaded x 1 1/2" Slip PVC Heater unions as well as a gasket that fits between the union and the tube flange... This kit is...

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of different brands of tubs and there is a list below of...

Tailpiece, 2"mbt x 1-1/2"s/2"spg, w/Split Nut, Heater   Heater Union Part Type Tailpiece First Plumbing Connection Size 2" First Plumbing Connection Type Male Buttress Thread (mbt) Second Plumbing Connection Size 1-1/2",...

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tube, Element, Pressure Switch, Split nuts, pigtail wires and Gaskets. The new version of this heater includes...

This part is a Standard 3.0KW Heater Element 115v or 230V that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes.   This part...

These have been being obsolete but they are back in production and we are expecting some in the May of 2019.. Watkins Replacement Element Old Style for HotSpring come with a gasket kit as well.. Cap with Thermowell and power...

Stainless steel aftermarket replacement heater assembly that fits systems that use dual sensor technology. 2" x 15" with two thd taps for the sensor assembly rated at 5.5kW/240v. Replacement sensors sold separately.

This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing through the...