Heaters and Related Parts

This part is a 2 1/2" Thread X 1" 90 Degree Barb Heater Union. The Union receives a 1" ID pipe on the barb side and then Screws to a 2 1/2'" Heater Flange using a 2 1/2" Nut on the heater side. This part is used on Heaters that are...

Watkins Replacement ManifoldFor 1.5kW/120v heater assemblies. Available with 1/2" ports or 3/4" portsElement sold separately

NOTE: This Complete Heater Assembly has just come available I have them in stock... This part is a 5.5KW Spa Heater Complete Assembly found in a Jacuzzi Whirlpool Control System includes the Element, Pressure Switch, new Titanium...

This heater is obsolete but there is a universal retrofit kit to replace it.. You can find that kit at this link: Universal, Low Flow, Retrofit Heater, 5.5KW ,Retrofit Kit 1" or 3/4" Hurricane OthersVertical 3" x 9" housing with 1" barb...

This part is a Heater Tailpiece, 2 1/2"mbt x 2" Slip.. The threaded side measures about 3 5/8" edge to edge and the Slip side measures about 2 3/8" Inside Diameter..  For the gasket that works with this Union click this Link: 2 1/2" Spa Hot Tub...

Flo Thru, Balboa LE, Value, M7, 15" x 2", 230v or 115v , 5.5kW, with Sensor without Mounting Studs.. Stainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube measures  2" Inside Diameter and the overall tube...

This housing alone is not longer available but a complete heater is available click here for that heater: 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings   Brett...

Leisure BayStainless steel, 17-1/2" x 3" 4.0kW/230v replacement heat exchanger. Made for use exclusively on Leisure Bay hot tubs. The original heater may have used a redundant hi-limit, if that is the case when replacing with this heater simply protect...

Balboa InstrumentsStainless steel replacement heater assembly. 2" x 15" manifold with1/8"npt pressure switch tap, does not include tailpieces

This part is a Heater, FloThru, Universal Fit, 15" x 2", 230v, 4.0kW..  This heater will work in place of the following heaters: 1563-08 , 20-00245 , 20-00317 , 20-00318 , 20-00319 , 20-00324 , 20-00433 , 20-00434 , 20-00454 , 26-0034 , 26-0036-R1C...

No Longer Available.. Leisure Bay&OthersVertical heater assy, 1" barb inlet/outlet same side, 3" x 9" dimensions, Rated at 5.5kW/240v. Similar to Hurricane except that the 1/8"npt pressure switch tap is located between the 1" ports and a temp...