Heaters and Related Parts

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.5kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 2" which would measure about 2 3/8" OD or 1 1/2" which would measure about 1 7/8" OD pipe....

Brass Fitting that fits an 1/8" MPT Jacuzzi heater fitting on one side a 3/8" ID tube on the other side. I have seen these in Jacuzzi Premium Trombone Heaters to attach the heater to the bleeder system though there are many applications this can be used...

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here: (D) Heater Element 5.5kw Gasket Kit Hot Tub Spa Part M7...

This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Sundance 680 Series tubs and some Sweetwater & Del Sol tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Sundance680 Series Tubs and some Sweetwater tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, Thermostat, P-Switch.. Heater Type - Square Flange Wattage - 5.5kW, Voltage - 230V Heater Dimensions - 1-1/2" spigot x 14-1/4"...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings.. Heater Type - Square Flange Wattage - 5.5kW, Voltage - 230V Heater Dimensions - 1-1/2"...

This part is a United Spas Stainless steel 5.5kW/230v, 2" x 13-1/4" replacement flow thru heater assembly. Has a pressure switch tap, external thermal well, (2) mounting studs & (2) 2" pvc tailpieces with o-rings. Therm Products C2550-1206...

This Kit is a Set of (9) Replacement Gaskets Only (3) Gasket for the "A" Coupling and (6) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...

This Kit is a Set of (6) Replacement Gaskets Only (2) Gasket for the "A" Coupling and (4) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...

This Kit is a Set of (3) Replacement Gaskets Only (1) Gasket for the "A" Coupling and (2) for the "B/C" Couplings.. The "A" Gasket measures about 1 7/8" edge to edge overall and the lip or L shaped part measures about 1 9/16" Center to Center.. The...

This is a Universal Low Flow Spa replacement heater that can be used in place of any Low Flow with the included kit or in some cases a little bit of additional tubing and fittings will be needed to complete the retrofit: Vertical Low Flow Canister...