Heaters and Related Parts

This part is a Hydro Quip Versi-Heat remote heater replacement assembly. The metal tube measures 2" x 13" with a 5.5 kilowatt, 230v heater element inside. Some versions are 4.5kw but this one will work in place of that version without issue. The black...

This Plumbing & Glue kit is used to change from a Cal Spa Dually Pump setup to a single Pump set up since the dually pump has been discontinued.. You will have to modify the plumbing and note that this kit is for most applications and may not be...

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.0kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 1 1/2" pipe which would measure about 1 7/8" OD.. You could use it wil 1" pipe with a reducer bushing....

This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/Jacuzzi

This part is an Adapter, Drain Plug, Sundance / Jacuzzi, 1/4" MPT x 3/8" Ribbed Barb, Stainless Steel, Less O-Ring.. Used on Various J-200, J-300, J-400, J-500, J-LX Series Spa Pump HeadsO-Ring is Required, Teflon Tape Not Used Click here for the...

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Set of 2X Universal 1 1/2" Pump Union Gasket/O-Ring Kit. 6 Items total..  There are three possible sizes on a...

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Universal 1 1/2" Pump Union Gasket/O-Ring Kit. There are three possible sizes on a 1 1/2" Pump union measuring in the...

Low Flow heater element in 4.0 KW for use with the Applied Computer Controls (ACC) ePack systems with the low flow circ pump option. This durable element is made specifically for the low flow environment and can handle higher temps without failure...

This Part is a Set of (2) NON-Standard 2" Heater Union Gasket with a 2 5/8" Center to Center Lip. Note: If you can't measure your heater union groove size we offer a set with both sizes Click this link: Set of (4) Hot Tub Spa 2"...

This part is a Heater Assembly, Gecko, Heat.Wav, IN.YJ, 1.0/4.0kW, 120/240v, 2" x 15", w/Temp and Flow Sensors, w/4' Terminated Cable Heater Type Flow Thru Heater Wattage 4.0/5.5kW  Inlet Size 2"  Outlet Size 2"  Type...

This part is a 1 1/2" Threaded Heater Union with Gasket which measures about 2 3/8" across the threaded side X 1 1/2" Slip which measures about 1 7/8" ID and is about 2" deep. The Union receives a 1 1/2" pipe or fitting...

This part is a 1 1/2" Threaded Heater Union which measures about 2 3/8" OD X 1 1/2" Slip or 2" Street which measures about 1 7/8" ID or 2 3/8" OD Heater Union with Gasket. The Union receives a 1 1/2" pipe or fitting on one...