Digital Control Systems and Parts

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair #spaguy...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater   This part is a single Jumper Strap to connect the heater to the circuit board on Balboa B2DG and B240 Systems. Requires two per...

This circuit board is obsolete. We have a compatible retro-fit option available here: Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP600 Topside This board is a replacement board for Circuit Board, Jumpking...

This part is a Control Box Cover that fits Balboa VS or GS Series Control boxes only..

Gecko has discontinued this version of the in.yj systems. Here is the new version that now includes a different topside and a wifi module: Gecko In.Yj Retro-Fit Control System w/ 4.0 KW Heater With K300 Topside and Wifi Module Gecko In.Yj retro-fit...

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add jumpers from the tabs to the feed and load side of the...

This part is aNew Balboa MS1600 Spa Hot Tub Board found in Master Spa Brand hot tubs.   Below Is a List of related parts to this board that you may need: Sensor Balboa M7ª 12" Temp Hi Limit 1/4" 2-pin Balboa Spa Hot Tub Heater M7 Sensor Mount...

The MODPACK UNI 202 is a universal replacement spa control system for a (2) Pump and Blower System with or without a Circulation Pump. Heater assembly is 15″ long, it is mounted to the back of the enclosure. To simplify the replacement process,...

This part is a Blackout, Adapter, Plate for an Analog Topside Control, Air, Tecmark, sometimes called a Command Center.. This Tecmark / TDI Command Center conversion kit can be used to mate the new style Command Center to the older smaller size or to...

You are purchasing a 3 Terminal Power Block found on many Control pack and board set ups..