Digital Control Systems and Parts

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

This part includes the replacement box only. You Choose these packs based off of the original part number found on your pack label this part number is any of these: 3-72-7018 , 844259, 0602-221001 , 0602-221015, 0602-221022 or scroll down for more...

This part is a VS300 Board that operates (1) Pump and Light..   If your board has this chip number VS300FLXR1(x) with any number in the X position this board is correct.. This board is used with (4) Button Topsides..   This board can...

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    LE, Value...

This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet...

You are purchasing a Balboa Board Fuse Repair Jumper for board soldered on fuses found on many Balboa Brand Spa Hot Tub Boards. This jumper features a fuse holder with a .5A replaceable Fuse that can be added to any soldered on board fuse that has been...

The Lite Leaderª replacement is now available! This unit will replace a Balboa Light Leader system in almost any configuration. It can even be used to replace a system with a remote heater or use the heater in it's factory spot. It is designed to...

No cords are included with this replacement pack. Dimensions of control system: Heater: 2Ó x 15Ó Box Height 11-1/2Ó Box length 14-1/4Ó Box Width 3-3/8Ó The S-class series of spa controls presents versatility and...

T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair ActionCoilAmps SPST 24 VDC 30amp Coil Voltage Type DC Relay/Contactor...

Ths is a Direct Replacement controller for a Gecko SSPA System this pack will run (1) 2 Speed pump, an Ozonator and a light only. Please be sure that you make sure your topside is compatible. It is only compatible with TSC-9, TSC-18 or TSC-19...

This Part is a Single Jumper Strap for a Balboa, EL, VS, GL or GS, Heater to Board connection.. This part is made from Copper.. Measures 2" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    EL,...

This part is a Standard Balboa Heater M7 Sensor with a 24" wire. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so...