Digital Control Systems and Parts

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Mini Oval Topside, a Light wire...

This part is a 5 Position 50 Amp Terminal Block found in Balboa Lite Leader Packs and some others..  Terminal Type    Terminal BlockTerminal Style    Terminal Block/StripNumber of Connections  ...

No longer available. Please see Balboas new retro-for replacement system here: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit Complete control system with a 15" long...

This part is a Balboa SUV Board.. There are many part numbers you will find on your old board to cross to this board..One thing that goes wrong with this particular board is the transformer tabs or fingers will break in two causing the board not to power...

Universal Balboa circuit board used to replace many OEM boards that are discontinued. This board will give you all the same functionality as your original. Only differences may be default set temp, default filtration cycle settings etc. Can replace...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This part is a Relay, Closed Style, T-90 Type, 12vdc, Coil, 30 AmpCircuit board mounted. Use to complete simple circuit board repair. Action Coil Amps SPST 12 VDC 30amp Coil Voltage Type DC Relay/Contactor Style Relay Pole/Throw Single Pole...

Duplex Digital and Super Digital/M-1 Replacement Boards This board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa M-1 system. Balboa circuit boards are marked with a ÒChip NumberÓ that is located...

This relay is No Longer Available.. T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair Action Coil Amps SPST 18 VDC 30amp

Vita Spa OEM circuit board made by Consumer Engineering. This PGI Graphic circuit board is made to replace many older versions. This board has support for up to 3 pumps and a circ pump. Replaces L500 / LC500 / L500A / L700 / L700C / L100 / L200 / R100 /...

This circuit board has been discontinued. You will need to install a new retro-fit control system, see below for choices but be sure to verify these have the correct support for your model:Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone...