Valves All Types Ball, Check, Diverter, etc...

This part is a Hoss 2" Slip X 2" Slip Slice Gate Valve with Keeper. The Valve recieves a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on both sides. This part is used in hot tubs to...

This kit features an Updated Hoss Modern 2" 

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" slip or 1" Street, Gray, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked...

This New Old Stock part is a Complete Hot Tub Spa Part Clear 7 5/8" Waterfall Assembly 2 Hole Style Hole size is about 1" each.. You will get (2) 90 degree 1/2' Slip fittings with the waterfall.. If

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is u

This part is a Stem Washer for a

This part is a Drain Valve with 1/2" inch Slip Glue In style fitting.. If you need to make this a barb style click here for the kit: 3/4" Tubing Barb Connect Kit with Glue, 3/4" Barb x 3/4" Smoo

This part is no longer available.This part is a LA Spa Gray Odd Shaped Diverter Handle 5 1/2" x 2 1/8". 

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single...

This part is a 3 1/2" Long X 1 9/16" Wide Jacuzzi® Premium Spa Waterfall Control Handle part that fits 2006+ J