Valves All Types Ball, Check, Diverter, etc...

This part is a Gray Textured 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the...

This part is a Gray Smooth 5 Scallop 3 3/4" Spa Diverter Cap only.  This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the...

This Kit is a 3 3/4" Diverter Zone Control Selector Handle, 4" Diverter Cap, Stem Gate & O-Ring Kit to fit a Marquis Brand Hot Tub. This Diverter handle Slides on the Diverter Valve Stem is used to operate the Diverter Valve. The Cap...

This part is a Drain Valve with 3/4 inch Barb that is found on some Jacuzzi or Sundance Hot Tubs.. This valve features a hole size of 1 5/16", Receives clear vinyl tubing on one end with the 3/4" barb and a garden hose fitting on the other end....

This part is a Waterway Brand Drain Valve with a Pull Handle for a On/Off Valve, Water Hose Cap... This valve features a 3/4" Slip flex pipe connection.. The pipe that glues into this would measure 1" OD.. FEATURES: Low profile design Hose bib pulls out...

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This part is a Drain Cap with a Pull Handle for a Waterway Brand On/Off Valve, Water Hose Cap... Note: Colors can vary Black, White or Green NOTE: This Cap will only work on Waterway Brand Drains do not order for any other brand.. I put an example of...

This Kit is an Upgraded 3 3/4" Wide Buttress Silver Diverter Valve Cap, Valve Stem with a Swoosh Black Knob and O-Ring Kit. This Kit comes with The Swoosh Handle, Valve Stem, Buttress Cap and (2) Small O-Rings and (1) Large O-Ring...

This Kit is an Upgraded  3 3/4" Wide Buttress Diverter Valve Cap with a Black Knob and O-Ring Kit. This Kit comes with The Teardrop Handle, Buttress Cap and (2) Small O-Rings and (1) Large O-Ring. The Valve these parts fit is found on...

This part is a Hoss 2" Slip X 2" Slip Slice Gate Valve with Keeper. The Valve recieves a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on both sides. This part is used in hot tubs to stop the water so you could service the heater or the...

This kit features an Updated Hoss Modern 2" Diverter valve with a locking ring in a Kit which Includes 4oz of Blue Glue and 4oz of Purple Primer and the Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2)...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue Glue.. This kit is used to Connect the 3/4" Barbed...