Retrofit Kit to Convert from Laing to Grundfos Circulation Pump 1" Clear & 4 Clamps

(No reviews yet) Write a Review
SKU:
ASPRetrokit1
Shipping:
Calculated at Checkout
  • Retrofit Kit to Convert from Laing to Grundfos Circulation Pump 1" Clear & 4 Clamps
  • Retrofit Kit to Convert from Laing to Grundfos Circulation Pump 1" Clear & 4 Clamps
  • Retrofit Kit to Convert from Laing to Grundfos Circulation Pump 1" Clear & 4 Clamps
  • Retrofit Kit to Convert from Laing to Grundfos Circulation Pump 1" Clear & 4 Clamps
  • To make it easier to slip the 3/4" inside of the 1" clear pipe heat the tubes with a a hairdryer but be careful not to blow yourself up on the glue is highly flammable!!!
  • The Laing has a 3/4" Outside Diameter Barb...
  • The Grundfos has a 1" Outside Diameter Barb...
  • This is an example of a Grundfos pump Retrofit installed in a Sundance tub.. Notice the old 3/4" tube is glued inside of the new 1" tube..
  • This is an example of a Laing pump in it's pre-retrofit state.. See the next picture for e after retrofit..
  • This is an example of the Grundfos pump Retrofitted into a basic installed tub.. Notice the old 3/4" tube is glued inside of the new 1" tube..
  • The Laing on the left is 3/4" and the Grundfos on the right is 1"...
  • This s an example of a properly retrofitted pump in a Sundance Tub..
MSRP: $19.99
$14.99
— You save $5.00

Description

This Kit consists of 18" of 1" Inside Diameter Clear Tubing and (4) Clamps.. This Kit is used to convert your Hot Tub from the more expensive less reliable 3/4" Laing Circulation Pump to The less expensive more reliable Grundfos.. The extra length of the tubing is used to slide over the existing 3/4" tube and extend to the pressure side of the new Grundfos pump which is on the opposite side of the pump.. Watch the video and look at the pictures for more information... 

Save

View AllClose