Wet End Pump Parts

This is a 2.0HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...

This Part is a Barbed Bleeder Barb with O-Ring that fits New Style 48 or 56 Frame Intertek LX Brand Pump Wet End that uses a fine thread bleeder plug on Jacuzzi and Sundance Brand Tubs.. Watch the video for instruction on how to install...

This Part is an Old Style Barbed Bleeder Plug that fits some 48 or 56 Frame WUA Intertek LX Brand Pump Wet Ends that use coarse thread bleeder plugs be sure to compare your old plugs to the pictures.. Watch the video for instruction on...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Newer Style Face Plate on an Intertek LX Brand Pump Wet End. Be sure to compare your old plugs to the pictures.. NOTE: This Wet End's parts looks a lot like an Aqua-Flo and a CMP Wet End...

This Part is an Old Style Plug for a coarse Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses coarse thread bleeder plugs be sure to compare your old plugs to the pictures..  Note: This part Fits...

This Part is a Wet End O-Ring for a 40 or 56 Frame Face Plate for a Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 6 3/8""...

This part is no longer available.. The only solution is a complete wet end..  This Part is a 48 or 56 Frame Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses fine thread bleeder plugs be sure to compare your old plugs...

This Face Plate O-Ring Is 5 1/8" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...

Drain Plug with O-Ring for Waterway Wet Ends Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More  We also offer the 3/8" Barb that replaces these plug in the case of using a Pump Bleeder System... This are found...

This Wear Ring only fits Waterway Executive 4 or 5HP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 13/16" thick from front to back or some Intertek impellers... If you have a Waterway Executive 1,2 or 3 Horsepower Wet End it will require...

(25) Tubing Clamps, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Links to related parts: (1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for...

(1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Self-compensating hose clamp expands/contracts with temperature change Cannot be over/under...