Pump Impellers

Power-Right Pump Impeller Note: This Impeller is Obsolete so I have very few left.. Closed face impeller made for the Power-Right PR420-5F spa pumps. Seals & kits for this Impeller can be found here: 201 Seals Impeller Type    Closed...

This part is an Impeller for a 48fr Vico Ultima or Ultra Flo, 0.50hp, Jet or Circulation Pump... Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico/Balboa. Rated at 1/2hp, it is used in an Ultima and/or Ultra Flo pump wet end, and...

This part is a 2.0HP Impeller fits some Jacuzzi, Sundance or Watkins Thermax Wet Ends only and would be found on a motor that is about 8.0 to 10.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on Jacuzzi...

This part is discontinued by the manufacturer.. This Part is a Power-Right Pump Face Plate only.. Related Parts: Impeller, Power-Right, 9089X/504, 2.5ohp/5spl Face Plate, Power-Right, Cal Spa, Power Right, Pump, Wet End, Volute, 5 Bolt, 2" X 2"...

This Part is a 1HP Impeller that fits an E-Series 48 Frame 1 1/2" Center discharge Wet End which is found in hot tubs some but on Above Ground pool pumps many times. This Impeller fits between the Face and the Volute of an E-Series Wet End. I...

This 5 3/4" Inside Diameter O-Ring fits around the face of a Waterway HI-Flo 48 Frame Wet End all Horsepowers and fitting sizes... This is (1) O-Ring ONLY!! As you can see below it fits other pumps and filter housings as well.. Part...

This item is a 3/4HP Waterway HiFlo Pump Impeller "B" Kit which included the Seal Kit as well.. If Your motor is 115V the amperage would be about 10 Amp if 230V it would be about 7 amps..Closed face impeller made for the HiFlo side discharge...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 2.5hp,which would be 10-11.0 Amps.. Click here for the Seal for this impeller Vico...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 4.0hp,which would be 13-14.0 Amps.. Click here for the Seal for this impeller Vico...

This is a 2.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...

This is a 2.0HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 11.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. Note: The three things you need to...

This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Impeller...