1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • 2X Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of  Each Size This is an example of measuring a union Center to Center on the groove.. This one is 2" CTC..
    Add to Cart

    2X Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of Each Size

    MSRP: $33.94
    $22.98
    NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Set of 2X Universal 1 1/2" Pump Union Gasket/O-Ring Kit. 6 Items total..  There are three possible sizes on a...
    MSRP: $33.94
    $22.98
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $33.94
    $22.98
    Subtotal:
  • Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of  Each Size This is an example of measuring a union Center to Center on the groove.. This one is 2" CTC..
    Add to Cart

    Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of Each Size

    MSRP: $16.97
    $12.99
    NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Universal 1 1/2" Pump Union Gasket/O-Ring Kit. There are three possible sizes on a 1 1/2" Pump union measuring in the...
    MSRP: $16.97
    $12.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.97
    $12.99
    Subtotal:
  • Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX Pump Shaft Water Slinger, All Brands
    Add to Cart

    Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX

    MSRP: $4.99
    $2.99
    This part is a Pump Shaft Water Slinger designed to sling water away from the motor front bearing in case of a seal leak and it fits All Brands of Hot Tub Pumps..   This part goes on the shaft before you install the wet end.. 
    MSRP: $4.99
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $4.99
    $2.99
    Subtotal:
  • Red 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics Red 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics
    Add to Cart

    Red E 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics

    MSRP: $24.99
    $19.99
    Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...
    MSRP: $24.99
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $24.99
    $19.99
    Subtotal:
  • This is Part #13 a FMVP O-Ring Between 4 Bolt Suction Plate and Face 2-3/8" ID 1/8" This is Part #13 a FMVP O-Ring Between 4 Bolt Suction Plate and Face 2-3/8" ID 1/8"
    Add to Cart

    FMVP O-Ring Between 4 Bolt Suction Plate and Face 2-3/8" ID 1/8"

    MSRP: $6.99
    $4.99
    This part is found on a FMVP Vertical Circle Pump and is the O-Ring Between 4 Bolt Suction Plate and Face 2-3/8" ID 1/8"..
    MSRP: $6.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $6.99
    $4.99
    Subtotal:
  • (1) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps (1) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps
    Add to Cart

    (1) Front Bearing & 200 Seal Pump Parts Kit Fits Most Aqua-Flo Spa Pumps

    MSRP: $39.99
    $29.99
    This is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends...
    MSRP: $39.99
    $29.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $39.99
    $29.99
    Subtotal:
  • Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only
    Add to Cart

    Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only

    MSRP: $27.99
    $16.99
    This Tool is a Die that fits all American made Hot Tub Pump shaft threads.. This fits Hot Tub Pumps only in these brands.. Waterway, Aqua-Flo, Sta-Rite, Vico and Power-Right.. Note: This will NOT for LX Intertek Motor Shaft... 
    MSRP: $27.99
    $16.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $27.99
    $16.99
    Subtotal:
  • Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $17.99
    $11.99
    This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...
    MSRP: $17.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.99
    $11.99
    Subtotal:
  • O-Ring, Aqua-Flo, FMVP, FMHP, FMCP, CMHP, CMCP, 1-1/2", Face to Volute O-Ring
    Add to Cart

    O-Ring, Aqua-Flo, FMVP, FMHP, FMCP, CMHP, CMCP, 1-1/2", Face to Volute O-Ring

    MSRP: $8.99
    $6.99
    This Face Plate O-Ring Is 4-3/4" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Connection Kit,  3/8" Tubing, 1/2" OD,  6" length for Air Systems or Jet Body Air Connections Connection Kit,  3/8" Tubing, 1/2" OD,  6" length for Air Systems or Jet Body Air Connections
    Add to Cart

    Connection Kit, 3/8" Tubing, 1/2" OD, 6" length for Air Systems or Jet Body Air Connections

    MSRP: $12.99
    $6.99
    This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...
    MSRP: $12.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $6.99
    Subtotal:
  • Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, 1/15th HP Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, 1/15th HP
    Add to Cart

    Circulation Pump Impeller, Aqua-Flo, CMCP, CMHP, FMVP, 1/15th HP

    MSRP: $44.99
    $34.99
    This is a 1/15th HP Impeller for an Aqua-Flo Circulation Pump 48 Frame Side or Center Discharge CMHP, CMCP and FMVP Series Wet End. This Impeller fits between the Face and the Volute of an Aqua-Flo CMHP, CMCP and FMVP Series Wet End. I would advise...
    MSRP: $44.99
    $34.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $44.99
    $34.99
    Subtotal:
  • O-Ring, Aqua-Flo, FMCP, FMHP, TMCP, CMHP, 1-1/2" Face to Volute O-Ring
    Add to Cart

    O-Ring, Aqua-Flo, FMCP, FMHP, TMCP, CMHP, 1-1/2" Face to Volute O-Ring

    MSRP: $8.99
    $6.99
    This Face Plate O-Ring Is 5 1/8" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Total: items /

Adding your products to cart