Complete Wet Ends

This part is a Complete CMHP 1/15th HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for CMHP pumps. This wet end is used with a 48 frame motor that would have about .6 Amps on High Speed on a...

This O-Ring is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

This part is a Front and Back Volute for a Vico, Ultimax, 2" X 2", 48 or 56fr motor.. This part will fit both 48 and 56 frame motors and does not come with any other accessories like the seal, bolts or impeller.. For other parts click this link for this...

This thru-bolt is 10-32 threads and 10-3/4" Long and has a 5/16" Bolt head.. It fits some Intertek Guangdong LX 56fr motors only.. Motor Brand    Intertek Guangdong LX 56frMotor Parts Type    Thru-BoltPart...

This Face Plate O-Ring Is 4-3/4" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This is a 1/15th HP Impeller for an Aqua-Flo Circulation Pump 48 Frame Side or Center Discharge CMHP, CMCP and FMVP Series Wet End. This Impeller fits between the Face and the Volute of an Aqua-Flo CMHP, CMCP and FMVP Series Wet End. I would advise...

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

You are buying a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo...

This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...