Aqua-Flo 115V 48 Frame Pumps

This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...

This Pump is a 48Frame 2115V 2 Speed with a 1.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 9.5A and low speed is 3.2 Amps....

This Pump is a 48Frame 115V 2 Speed with a 1.5-2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3A and low speed is 4.1 Amps....

This Pump is a 48Frame 115V 2 Speed with a 1.0 HP Wet End that features a Side Discharge 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 9.5 and low speed is 3.2 Amps....

This Pump is a 48Frame 115V 2 Speed with a 1.5 HP Wet End that features a 1 1/2" x 1 1/2" Side Discharge Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3 and low speed is 4.1 Amps..     Complete...

This part is a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base. This motor base mounting pad fits under any 48 frame pumps, and under most 56 frame...

This pump s a 115V (2) Speed 13.3 Amp High Speed and 4.1Amp Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall...

This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet...

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...

This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...

This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Side and mounts to the existing Pump Union Body...

This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...