Loading... Please wait...
  • Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A
  • The pressure side measures 3" edge to edge on the threads..
  • The Suction side measures 3" edge to edge on the threads..
  • Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A
  • Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A
  • The wire connections are here.. (H) for High Speed (C) for Common which is the White Wire and (L) for Low Speed.. Note: Red is usually High Speed and Black Low speed but not always so make sure you look at the position of the original wire before you unhook.. An easy way is to take a picture with your phone.. Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A
  • Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A
  • You can turn the wet end to the 3 o'clock position by loosening the 4 thru bolts and turning the wet end an reinstalling the bolts..
  • You can turn the wet end to the 12 o'clock position by loosening the 4 thru bolts and turning the wet end an reinstalling the bolts..
  • You can turn the wet end to the 9 o'clock position by loosening the 4 thru bolts and turning the wet end an reinstalling the bolts..
  • Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed  13.3A/4.1A

Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed 13.3A/4.1A

RRP: $549.57
Your Price:
$389.99 (You save $159.58)
SKU:
HTP34-402-5200
Shipping:
Calculated at checkout
Quantity:

 

Product Description

This pump s a 115V (2) Speed 13.3 Amp High Speed and 4.1Amp Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug this pump may draw too much amperage to work with your heater on a wall plug.. Always match the amperage when choosing a replacement 115v pump with the previous motor or you could create some over amperage issues with your hot tub..

Spa Pump Features:

  • Fine tuned impeller that moves water through the system with maximum performance
  • 2" suction and discharge
  • 48 and 56 frame versions
  • Thermally protected to extend life expectancy of motor
  • Multiple drain locations
Complete Pump Type Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 115v
Drain Plug Location 4,6,9 o`clock
Pump to Motor Foot Types 9
Suction Style Center
Suction Connection (Physical Dimension) 3-1/16"od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection (Physical Dimension) 3-1/16"od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 1.5hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 13.3A/4.1A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2
Manufacturer Impeller Number HTP35-402-1410
Volute Fastening Type 8 Screws
Volute/Sealplate Number 92770705

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 

For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example.

8.0 = 1 HP

10.0 = 2 HP

12.0 = 3 HP

14.0 = 4 HP

16.0 = 5 HP

 

For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP.

  8.0 = .5 HP

9.0-10.0 = .75 HP

10.0-13.00 = 1 HP

13.5-15.0 = 1.5 HP

16.0-20.0 = 2 HP

Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.

 

NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.

NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

Find Similar Products by Tag

06115000-1040  115  115v  14A  15a  2 speed  2-spd  2.5  48  48fr  aqua flo  Aqua-Flo  AquaFlo  auqa flo  auqa-flo  auqaflo  complete  frame  help  motor  pump  Pumps  spd  speed  XP 2  XP2  xp2e  

Product Reviews

Write review

  1. Perfect fit

    Posted by Roy Murphy on Aug 5th 2017

    Great product, great service !


  2. Great Pump and Service

    Posted by Unknown on Nov 29th 2016

    Buck was a tremendous help. On the phone he guided me through identifying my old pump. I emailed him a few pictures and he told me exactly what I needed. It arrived in two days, and fit exactly like the old one. Back in business, just before a big storm and cold snap. Much thanks!


Back to Top

Click the button below to add the Complete Pump, Aqua-Flo XP2, 1.5HP, 115v,48 frame, 2"x 2", 1 or 2 Speed 13.3A/4.1A to your wish list.