Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Complete Pump, Aqua-Flo, FMCP, 1.0HP, 115v, 2-spd, 48fr, 1-1/2", 1 or 2 Speed, 9.5A
MSRP: $599.99$479.99This Pump is a 48Frame 2115V 2 Speed with a 1.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 3" across the threads... High speed Amperage is 9.5A and low speed is 3.2 Amps....MSRP: $599.99$479.99 -
Pump, Vico Ultima, 2.0hp, 230v, 2-spd, 48fr, 2"Side Discharge
MSRP: $689.99$489.99This part is a Complete Pump and motor, Vico Ultima, 2.0hp, 230v, 2-spd, 48fr, 2"Side Discharge..The connections on this pump are 2" x 2" which measures about 3" Edge to edge on the threads.. Spa Pump Features: Compact 48 frame design Dual Speed...MSRP: $689.99$489.99 -
Complete Pump,Aqua-Flo, FMCP, 1.5HP, 115v, 48fr, 1-1/2", Center Discharge, 1 or 2 Speed 13.3A
MSRP: $649.99$549.99This Pump is a 48Frame 115V 2 Speed with a 1.5-2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 2 5/16" across the threads... High speed Amperage is 13.3A and low speed is 4.1 Amps....MSRP: $649.99$549.99 -
Pump, Waterway, Executive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps
MSRP: $688.99$499.99This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering. This...MSRP: $688.99$499.99 -
Complete Pump, Aqua-Flo, FMHP, 1.0HP, 115v, 48fr, 1-1/2", 1 or 2 Speed
MSRP: $595.99$479.99This Pump is a 48Frame 115V 2 Speed with a 1.0 HP Wet End that features a Side Discharge 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16" across the threads... High speed Amperage is 9.5 and low speed is 3.2 Amps....MSRP: $595.99$479.99 -
Pump, Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2", OEM
MSRP: $549.99$439.99This complete pump is a Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2"...Spa Pump Features:Executive wet end designed specifically for 48-frame motorsLarge 6-1/2" diameter wet end for higher head pressure2" intake and dischargeWet end can be rotated...MSRP: $549.99$439.99 -
Complete Pump, Aqua-Flo, FMHP, 1.5HP, 230v, 2-spd, 48fr, 1-1/2".1 or 2 Speed
MSRP: $686.99$499.95This Pump is a 48Frame 230V 2 Speed with a 1.0 HP Wet End that features a 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16" across the threads... High speed Amperage is 6.8-7.7 and low speed is 2.2 Amps.. Complete Pump...MSRP: $686.99$499.95 -
Pump, Waterway Executive, 1.0hp, 230v, 2-spd, 56fr, 2" x 2" , 8.0 Amp
MSRP: $626.99$439.99This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...MSRP: $626.99$439.99 -
Pump, Vico Ultimax, 2.0, hp, 230, volt, 2-spd, 56fr, 2"x 2" Side Discharge Complete
MSRP: $680.99$419.99This pump is a 56 frame Motor with a Vico Side Discharge Wet End with 2" Suction and Pressure Threaded fitting that measure about 3" from edge to edge on the threads. This is a 2 Speed pump and the Amerage is 8.8 on high speed and 3.0 on low speed which...MSRP: $680.99$419.99 -
Complete Pump, Aqua-Flo, FMHP, 2.0HP, 230v,48fr, 1-1/2", 1 or 2 Speed 8.5A
MSRP: $801.99$544.99This Pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16"" across the threads... High speed Amperage is 8.5 and low speed is 2.8 Amps.. Complete Pump...MSRP: $801.99$544.99 -
Pump, Waterway, Ex2, 2.0hp, 230v, 2-spd, 48fr, 9.0A, 2", XP2 or XP2e Replacement
MSRP: $586.99$474.99This Waterway 2.0hp Ex2 Pump is 230v, 2-spd, 48fr, 9.0A, 2"x 2" and it is a perfect XP2 or XP2e Replacement.. This is Waterways answer to an Xp2 pump.. Manufacturer Waterway Pump Model EX2 Speed 2 Speed (2-Spd) Motor...MSRP: $586.99$474.99 -
Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM
MSRP: $803.99$529.99This pump is a Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM This is an unusual pump meaning the suction side is called 2 1/2" and measures about 3 5/8" Across the threads and the Pressure Side is 2" and measures about 3"...MSRP: $803.99$529.99