Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP
MSRP: $17.99$11.99This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...MSRP: $17.99$11.99 -
Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
MSRP: $34.99$24.99This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...MSRP: $34.99$24.99 -
Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
MSRP: $16.99$13.99This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...MSRP: $16.99$13.99 -
Pump, Vico Ultima, 1.0-1.5hp, 115v, 2-spd, 48fr, 2"Side Discharge
MSRP: $589.99$489.99This pump is a Vico 48 Frame 115V 1.0-1.5HP 2 Speed replacement pump.The connections on this pump are 2" x 2" which measures about 3" Edge to edge on the threads.. Spa Pump Features: Voltage 115V, 60Hz High speed 11.9 Amps, low...MSRP: $589.99$489.99 -
Out of stock
LX Intertek 56Fr Motor Thru Bolt, 10-32 x 10-3/4" Long x 1-5/8" thread, 5/16" Head, Used Only
MSRP: $9.99$7.99This thru-bolt is 10-32 threads and 10-3/4" Long and has a 5/16" Bolt head.. It fits some Intertek Guangdong LX 56fr motors only.. Motor Brand Intertek Guangdong LX 56frMotor Parts Type Thru-BoltPart...MSRP: $9.99$7.99 -
39578-03 ,Hot Spring LX Hot Tub 56Fr Pump 2" X 2" 2.5HP 2 Speed 230V Vendor Code 3536
MSRP: $629.99$449.99This Pump is a Perfect Replacement for a LX 39578-03 Pump it is a 2.5 Horse Power 12.0/4.4 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure...MSRP: $629.99$449.99 -
Watkins Hot Spring Impeller & Seal Kit XP2 2.5 HP 2 1/8" Eye Vendor # 4081, Wavemaster ,9000, 9200
MSRP: $58.99$48.99This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...MSRP: $58.99$48.99 -
Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame
MSRP: $79.99$65.99This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame found in some Sundance or Jacuzzi Hot Tubs.For the motor that is used with this bracket click this link: Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A,...MSRP: $79.99$65.99 -
Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II, 6500-343, 6500-092
MSRP: $499.99$389.99This part is a 2.0 Horse Power 10.0/3.0 Amp (2) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and or 6500-343, 6500-092 on the label. The...MSRP: $499.99$389.99 -
Hi-Flo, Pump, Waterway, 2.0hp, 230v, 2-Speed, 48 frame, 2" X 2"
MSRP: $596.99$489.99This pump is a Complete 2.0HP Hi-Flo Side Discharge 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be sure that the...MSRP: $596.99$489.99 -
Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
MSRP: $449.99$389.99This 1 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Guangdong LX Brand Pump. These pumps usually have the part number 48WUA1001C-II on the label for a Watkins Version. Watch the video for instruction on how to Identify...MSRP: $449.99$389.99 -
Complete Pump, Aqua-Flo XP2, 1.0HP, 115v, 10.5/3.2A, 48 frame, 2"x 2", 1 or 2 Speed
MSRP: $589.99$489.99This pump is a 115V (2) Speed 10.5 High and 3.2A Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug...MSRP: $589.99$489.99