Aqua-Flo Circulation Pump

In this video The Spa Guy shows you how to use a Grundfos Circulation Pump in place of a Laing Circulation Pump... The Spa Guy feels the Grundfos is a better pump and i less money....

This part is a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or O_Ring that matches Unions. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1...

This part is a Standard 2 1/2" Pump Union O-Ring. The O-Ring is 2 1/2" Center to Center across and fits some unions but there are exceptions so please see the pictures and compare. This part is used in hot tubs between a pump...

This pump complete is not longer available but we have a solution.. If you need the motor click here and then click on the pump parts section.. Order the motor and then order the pump parts needed to complete the repair while reusing your pump housing....

AMP Style 3 wire Cord With Male Plug to be used with (1) Speed Pumps, Blower Motors, Ozonators, Power Supplies and any other 3 wire appliance that requires an AMP plug to connect to the control box... Black Is High Speed, White Is Common and Green is...

This is a 115V Center Discharge Aqua-Flo Circulation pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation...

Hayward Union Adapter Assembly With this adapter you can convert the old style Hayward 2" Thin Threaded Union to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed the O-ring...

This part is a Adapter, 1/2" Spigot x 3/4" Barb, 90 used on Union fitting/part for 1/16 Hp Circulating Pumps.. Barb Fitting Type 90 deg Barb Adapter Barb Size 3/4" Barb Type Barb (b) Plumbing Connection Size 1/2" Plumbing...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet...