This pump is a Replacement for a Laing or a New Style Grundfos Circulating Pump 230V with 3/4" Barbs found in many Jacuzzi® and Sundance® Hot Tubs... In my opinion this is a better pump than the Laing Brand... Spa Guy
This pump can be used in place of a Laing Circulation pump but will not fit in the exact mounting spot but you simply screw the screw into the new mounting plate..
REDESIGNED CIRCULATION PUMP FOR JACUZZI® HOT TUBS & SUNDANCE® SPAS
OEM 230/240v circulation pump for select Jacuzzi® & Sundance® Spas. This new style pump is OEM equipment designed specifically by Jacuzzi Brands, for Jacuzzi® Hot Tubs and Sundance® Spas.
These replace older style Laing Circulation Pumps. Higher flow rates allow for improved water filtration while being less prone to flow errors. Older style pumps would tend to overheat due to dirty or clogged filters. This would also cause the shaftless deign pumps to burn out pre-maturely. Not so with this new style pump. Still connects to the same 3/4" plumbing.
Replacement circulation for the following models:
All 2002+ J-330 & J-335 Models
All 2002+ J-340 & J-345 Models
All 2002+ J-350 & J-355 Models
All 2002+ J-360 & J-365 Models
All 2002+ J-370 & J-375 Models
All 2002+ J-380 & J-385 Models
2002-2003 J-320 & J-325 Models
Mid year 2007-2012 J-270 & J-280 Models if equipped with a circulation pump
2008-2012 J-230 Models if equipped with a circulation pump
Mid 2009+ 680 Burlington if equipped with a circulation pump
Mid 2009+ 680 Hartford if equipped with a circulation pump
Mid 2009+ 680 Hawthorne if equipped with a circulation pump
Mid 2009+ 780 Hamilton, Chelsee, Certa and Camden
2007+ 780 Hamilton
2007+ 780 Chelsee
2007+ 780 Certa
2007+ 780 Camden
All 2005-2014 780 Series spas
All 2003-2004 Sweetwater models (Except Lagunas)
All 1997+ North American 800, 850 Series PermaClear Systems (Except 2005+ 880 Series Models)
Does NOT work on units that are 120/240v convertible regardless of how the hot tub is wired.
Replaces previous part number:
SM-909-NH-14 3/4" Barb 230 Volt
SM-909-NHW-14 3/4" Barb 230 Volt
SM-909-NH-18 3/4" Barb 230 Volt
SM-909-NHW-18 3/4" Barb 230 Volt
SM-909-NH-26 3/4" Barb 230 Volt
SM-909-NHW-26 3/4" Barb 230 Volt
SM-959-NHW-26 3/4" Barb 230 Volt
SM-1212-NH-26 3/4" Barb 230 Volt
PLEASE NOTE: IN RARE INSTANCES, OLDER MODEL HOT TUBS MAY HAVE LOW OVERHEAD CLEARANCE ABOVE THE EXISTING PUMP. IN ONE OF THESE INSTANCES, MOUNTING YOUR CIRCULATION PUMP IN A DIFFERENT LOCATION MAY BE NECESSARY. THIS IS VERY EASY TO DO. A FEW BARB FITTINGS, 3/4" TUBING, AND A COUPLE CLAMPS WILL MAY IT AN EASY JOB. PLEASE LET US KNOW IF YOU REQUIRE ANY ASSISTANCE WITH THIS.
This product hasn't received any reviews yet. Be the first to review this product!