HotSpring, Watkins, Caldera, Tiger River Spa Parts

This part is a Wear Ring that only fits LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 13/16" thick from front to back... LX Pumps..  

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Vendor Code 3536 Intertek Brand Pump Wet End only.. It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

This Pump is a Perfect Replacement for a LX 0982601-03 2.5HP 11.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it...

This 2.0HP Horse Power 10.0 Amp (1) Speed 56 Frame Complete Pump is a LX Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 39577-03 and Wavemaster 8200 on the label. It is about 7 1/4"" across the face of the pump, it...

This Pump is a Perfect Replacement for a LX 1431601-03 Pump it is a 3.0 Horse Power 12.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure...

This part is an O-Ring that fits a Watkins Wavemaster 7000 Vendor Code 0108 only wet end..   6" ID, 1/8" X Section Square.. The Watkins pump this fits looks like this:  

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and...

This 1.65HP Impeller fits a Watkins Vendor Code 0108 Wet End.. It can be found under the Name Wavemaster 7000 on Hot Spring, Caldera, Tiger River, Solana or Hot Spot tubs... You need to look at the face to determine if this is your Wet End.. Closed face...

This is a 2.5HP Seal, (2) Bearings & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring...

This is a 2.5HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring....