HotSpring, Watkins, Caldera, Tiger River Spa Parts

This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This Complete 77712 Wet End fits a 1019801-03 Vendor Code 3536 2 HP 56 Frame Pump.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller, Seal, Silicon and Seal Installation Tool that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from...

This Pump is a Aqua-Flo 0974001 48Frame 230V 2 Speed with a 1.5 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 8.5 and low speed is 3.0 Amps..   NOTE about these...

This complete pump and motor is an Aqua-Flo, 1431701-01, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style...

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Piranha, Vendor Code 0302, 1.65hp. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also the rubber part can...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Piranha, Vendor Code 0302, 1.65hp. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also the rubber part can...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Vico, Vendor Code 0302, 1.65hp. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...

This parts is a 36675, Vendor Code 0302, 1.65HP Impeller. Click here for the Seal for this impeller Vico Seal Options Impeller Type Closed Face Impeller Diameter OD 3-13/16" Vane Width ID 1/2" Eye Diameter OD 2-1/4" Eye Length 3/8" Impeller...

This pump is a Aqua-Flo 1019801 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump..   If you...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label. It is about 7 1/4"" across the face of the pump, it measures...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Vendor Code 3536 LX Pump Wet End.