Hot Tub Parts by Tub Brand

This filter fits Jacuzzi Premium Hot Tubs J-300, J-400 Series. It is 15 1/2" Tall and 6 5/8" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads. There...

NOTE: This heater is No Longer available so your only choice is this heater Click this Link.. Sundance SpasVertical heater assembly 3-1/2" x 13" with 3/4" barb x 3/4" 90° barb inlet/outlets. Rated at 5.5kW/240v. Note: Always verify that you do not...

This item is a Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures about 1 1/2" center to center...

This part is aSpa Diverter Valve Internal Stem only. This Diverter fits many different brands but it looks similar to some brands that it will not fit so be careful in your choice, check the measurements against your old stem valve and watch the...

 This filter is 13 1/2" X 4 15/16" and has a female SAE Large Thick Thread that is 2" which would really nmeassure about 2 1/4-2 3/8" ID. This filter is found in Four Winds Tubs, Barefoot and others. If you have the shorter verison of this filter...

This filter fits some Hotspring, Tiger River, Watkins Hot tubs.. It is a Filter, Cartridge, 65sqft, 3" Top Hole ID, 3" Bottom Hole ID , 8-1/2" Wide, 10-1/2" Tall.. Application Hot Spring Spas (Watkins), Tiger River Spas (Watkins), Watkins...

This part is a 5.5KW Sundance Sentry 850 / 750 Smart Heater Complete Assembly includes the Body, Element, Case and Manual Bimetallic Hi Limit with wires. This unit features a BiMetallic Backup high limit and the wires that tie to the board and is exactly...

This Filter cartridge is 5 5/16" Wide X 10 1/8" Tall.. It has a 2 1/8" hole on the top and bottom... it is 45 Sq Ft and is found in a lot of different brands... Dynasty Spas, Garden Leisure, Leisure Bay, Recreation Warehouse, Rainbow,Pentair,...

This item is a Black Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures about 1 1/2"...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

This filter is found only in Sundance Hot Tubs that is 19" long x 8 1/2" Wide and it has a hole in one end that is 2 1/2" that slips over a fitting with a nut ti tighten it into place and a nipple on the other end that is 2" wide that slips into a...

Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...