Hot Tub Parts by Tub Brand

NOTE: This Complete Heater Assembly has just come available I have them in stock... This part is a 5.5KW Spa Heater Complete Assembly found in a Jacuzzi Whirlpool Control System includes the Element, Pressure Switch, new Titanium...

This Filter is 14-7/8" tall x 5" wide it has 2 1/8" holes on the top and bottom. This filter does fit some Cal Spas but looks very similar to a standard sized filter which is 13 5/16" tall but this filter is slightly taller at 14 7/8"...

This part is a Filter Cartridge,  7 1/4"Tall x 7" Across 4" Hole for a Master Spa Down East 2002-2003. This filter is 7 1/4" long x 7" Wide and it has a hole in each end that is 4". The overall length of this housing is about 7". The top and bottom...

This Part is a Gray 2 5/8" Face Width Replacement Mushroom Knob for Waterway, Hydro-Air or CMP Brand Waterfall Control Valves.. The Bottom Accepts a 5/8" wide Square Stem and we offer these in Black, Gray and White.. See the link below....

This part is a Cartridge Filter 8" x 7" Wide 2" male pipe thread  32sqft found in some Master Spa or Down East Hot Tubs. This filter is 8" long x 7 " Wide. This filter has a threaded nipple that would measure about 2...

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

Flo Thru, Balboa LE, Value, M7, 15" x 2", 230v or 115v , 5.5kW, with Sensor without Mounting Studs.. Stainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube measures  2" Inside Diameter and the overall tube...

This part is a Black 4" Spa Diverter Handle Knob only.  This Diverter Knob mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The Diverter Valve that this part fits is used to...

Jacuzzi J-Series Wet End Kit Bottom Suction, center discharge, 2"mjt, 48 frame wet end by Jacuzzi/Carvin. This wet end is used with a 1.0hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The complete wet end...

This is a very unusual Air Manifold we have found in Sundance brand Hot Tubs nut can be found in others as well.. It is a 16-port manifold with (16) 3/8" barbs and 1-1/ 2" slip x 1-1/2"spigot or street meaning that a piece of 1 1/2" which measures about...

This filter is 9 1/4" X 4 15/16" and has a female SAE Large Thick Thread that is considered 1-1/2" which would really measure about 1-11/16". This filter is found in some Four Winds Tubs and others. If you have the longer verison of this filter which is...

This filter fits Some Caldera and other Watkins Hot Tubs.. The Cartridge is 75 sqft, It features a 2-11/16" hole in the bottom and is 7" wide by 14-3/4" tall.. Diameter    7"Length    14-3/4"Top Style  ...