Complete Heaters

Sundance SpasVertical heater assembly 3-1/2" x 13" with 3/4" barb x 3/4" 90° barb inlet/outlets. Rated at 5.5kW/240v. Purchase of a foam wrap jacket is recommended when purchasing manifold

Cal Spas 1990-1994 New replacement 5.5 KW electric heater assembly for older Cal Spa control systems, such as the PS1-PS5 systems. The original heater had a 2 inch manifold that tapers down to 1.5 inch unions at each end. The new version has a heater...

Arctic Spas ReplacementStainless steel replacement flow thru, L shaped heater assembly with a 5.5kW/230v incoloy element. This is an aftermarket heater made for use on Arctic Spas. Heater gaskets, and tailpieces are included. Pressure switch sold...

Aftermarket Replacement for Cal Spa XL Exchanger This heater assembly is not an exchanger but an in-line flow thru replacement. This heater assembly is designed as a drop-in replacement. 2" x 15"s/s housing with 2" slip tailpieces

You are buying a Complete Replacement 5.5KW Heater Assembly that fits ACC 1000 and 2000 Control Packs. ACC means Applied Computer Controls. This Heater Assembly includes the Tube, Element, 2" Split Nuts (3" inside) and Gaskets.  I also offer the...

Hydro-Quip Compact Series Whirlpool Bath HeatersPositively the smallest, most compact bath heater on the market todayFeatures1" socket unions (pressure) or 1-1/2" socket unions (vacuum)1.9" stainless housing7" flange to flange length120v or 240v...

Flow Thru Heater Assembly used in Sundance Spas, and Spa Builders, and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/240v, 1/8"npt pressure switch tap, (2) 2" socket tail piece, (2) 10-32 x 3/8" mounting stud

This original Vita Spa Heater is obsolete and has been replaced by the new model which will come with dettached heater pigtail wires. Vita/DM Spas Stainless steel 4.5kW/230v, 2" x 17-5/8" flow thru replacement heater assembly with a pressure switch tap...

Brett Aqualine EM100, EM190Also used in Hydro-Quip pre-1997 packs. 15" heater manifold assembly includes 5.5kW/240v element. Stainless steel manifold has top indent grooves and a 1/8"npt pressure switch tap. Shipped with 2" tailpiecesAlso used in ACURA /...

NOTE: This Complete Heater Assembly has just come available I have them in stock... This part is a 5.5KW Spa Heater Complete Assembly found in a Jacuzzi Whirlpool Control System includes the Element, Pressure Switch, new Titanium...

This heater is obsolete but there is a universal retrofit kit to replace it.. You can find that kit at this link: Universal, Low Flow, Retrofit Heater, 5.5KW ,Retrofit Kit 1" or 3/4" Hurricane OthersVertical 3" x 9" housing with 1" barb...