Hot Tub Parts of America

This part is a 5 Position 50 Amp Terminal Block found in Balboa Lite Leader Packs and some others..  Terminal Type    Terminal BlockTerminal Style    Terminal...

You are buying an Oval Topside that is a Balboa E8 with a Cat 5 Type plug end that uses only 7 of the buttons. This means it is capable of having 8 buttons but you will find this sometimes with...

The BP Series WiFi Module Kit allows you to access your hot tub via a direct connection anywhere in the local proximity of your tub, anywhere in your house that you can connect to your local...

This Baptismal Auto Fill Kit, Hydroquip BES/BCS Series, w/ Interface Module, Water Level (Float) Assembly is manufactured by Hydro-Quip.  Hydro Quip Baptistery Equipment Auto Level Kit (FLOAT...

This part is a Barb Adapter 3/4" Barb x 3/4" Street or 1/2" Inside Slip.. The means a 3/4" Inside Diameter tube would glue over the barb side while a 1/2" pipe which is 3/4" Outside Diameter would...

Barb Adapter 3/4" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/4" ID tube would be glued over the barb.

Barb Adapter 3/8" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/8" ID tube would be glued over the barb.

This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on...

This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56...

This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive...

Brass Fitting that fits an 1/8" MPT Jacuzzi heater fitting on one side a 3/8" ID tube on the other side. I have seen these in Jacuzzi Premium Trombone Heaters to attach the heater to the bleeder...

This part is a Barb Adapter, 3/4" Barb x 1" Slip.. That means that it will accept 3/4" Inside Diameter Tubing on the barbed side and a 1" Pipe or Fitting that would measure about 1 1/4" Outside...