XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
- SKU:
- HTP9169KA17
- Shipping:
- Calculated at Checkout
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
-
XP2e 3.0 HP 2 3/8" Eye Impeller Aqua-Flo 230V 12 Amp
Description
This is a XP2e 3.0HP Impeller.. The Impeller has a 2 3/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V there are no 115V versions.
Note: If your old impeller has a 2 3/8" Eye this is the only choice.. There are no other XP2 or Xp2e Impellers that are 2 3/8" Eye..
See the links below for seals, bearing and other parts for the XP2e Wet End..
Note: The three things you need to know to get the correct Aqua-Flo XP2 or XP2e Impeller is the Eye Width, Voltage and Amperage.. Use the chart with the Voltage and Amperage to determine the HorsePower.. DO NOT rely on the HorsePower on the pump it is usually “Overrated” not accurate.. See Chart Below.. The Eye Size Choices are 2 ⅛”, 2 ⅜” and 2 ⅝”..
This Impeller fits between the Face and the Volute of an Aqua-Flo XP2e Wet End.
Note: This Bearing has a 17mm bearing center hole; some motors on Aqua-Flo pumps have a 15.9mm bearing center hole so measure before ordering.. Put a Note in the space during check out and we will ship a 15.9mm instead..
Closed Face | |
Impeller Diameter OD | 4-3/8" |
Vane Width ID | 1/2" |
Eye Diameter OD | 2-3/8" |
Eye Length | 3/4" |
Impeller Width OD | 3/4" |
Seal Seat Depth | 1/8" |
Shaft Length | 1-1/2" |
Shaft Diameter OD | 5/8" |
Seal Seat Diameter OD | 1-1/4" |
Manufacturer | AquaFlo/Gecko |
Pump Application | XP2E |
6 Reviews
-
Aqua flow impeller
Works perfectly
-
Aqua flow impeller
Works perfectly
-
Only place to get the right parts for your spa.
I tried ordering an impeller for my AquaFlo XP2E from other sources without any luck. Ordered from Hot Tub Parts of America and got the right part fast. The instructional videos on the site are invaluable for answering your spar related questions. Thanks for sending the right part and giving me the knowledge needed to fix it myself.
-
Great Selection of Parts!
Hottubpartsofamerica.com made it easy to select the right parts!
-
Rebulding 3 hp marathon w/aquaflo end
Replaced bearings/seals/impeller in a 10 yr old pump. Very concise videos making rebuilding pump for a fraction of the cost of a new one. Easily followed- didnt put in service yet but already ordered a second set for remaining pump. Great site...highly recommend.Didnt know to go by amp rating for proper impeller...
-
Not Standard but Correct
This impeller didn't appear to be standard for my pump, but the measurements and details told me that this was the correct one. It fit and worked like a charm.