Shaft Seal, PS-200, 5/8" Shaft, Buna Fits Aqua-Flo Wet Ends and more
$10.99 (You save $0.24)
Calculated at checkout
You are buying a Kit that Features (1) PS-200 Seal for Aqua-Flo Pumps. This Seal is Used Primarily in Aqua-Flo Wetends but is found in some other brands like a Waterway "Viper*" Wet End. Pump Seal Assy 5/8"Shaft, 1.218"Seal O.D., 1.250"Seal O.D. The Spring Seal part goes onto the shaft of the Impeller and the Ceramic & Rubber part that goes into the Volute. The Hole in both parts is about 5/8". To Install you should put silicon sealant on the shaft of the Impeller and gently push it onto shaft after you have put a small amount of The Professors Silly Juice on the Impeller Shaft. Also the rubber part can use a light coat of silicon to slide it into place in the Volute or Wet End Body. We offer these alone, with The Professor's Silly Juice (Special Hot Tub Silicon Sealer) or with an Impeller in a kit. So if you need an impeller look for the PS-200 & Impeller Kit. Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. This Seal Fits Aqua-Flo Wet Ends and others. This listing is for the seal only any other parts are for illustration only!! ASPPS200,200, VG-200, USSPS200B, 10-0002-06, 92500150, 5250-104, AS-200,17304-0100S, PS-200
We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part please choose with care..
*Note: This Seal is Only Found in Waterway "Viper" & EX2 wet ends all other Waterway wet ends use a 1000 seal...