Waterway Executive Pumps & Parts

This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2 1/2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2 1/2" X 2" Executive Wet End that can be moved from the 12 O'clock...

This part is a 4 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

 This part is the slinger found between the impeller and wet end and the shaft going into the pump motor bearing area and is designed to sling water away from the bearing in case of a seal leak at the wet end.. Note: It has to be placed on the motor...

This Pump is a Waterway Executive, 3.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM The 2" Fittings measure about 3" edge to edge across the threads..  Spa Pump Features: Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position...

This Kit is an 5HP Impeller for an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

This Kit is an 3HP Impeller for an Executive 48 Frame Wet End up to 3HP Motor and a 56 Frame Wet End 3HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...

This Kit is an 4HP Impeller for an Executive 48 Frame Wet End up to 4HP Motor and a 56 Frame Wet End 4HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...