Valves All Types Ball, Check, Diverter, etc...

This part is a Kit that consists of (1) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valve and (1) 1 1/2" Pump Union with Gasket or O-Ring that matches Union. The Valve receives a 1 1/2" pipe or fitting on one side and then slips...

You are buying a Kit that consists of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

You are buying a Kit that consists of a 2" Spigot X 2" Slip Slice Gate Valve and a 2" Pump Union with Gasket or Oring that matches Union. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve...

This Kit is a 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Union with O-ring and a 2" Coupler for gluing 2" plumbing to the slice valve.  The Valve receives a 2" pipe or fitting on one side and...

This kit is a Diverter in a Kit which Includes 4oz of Red Hot Blue Glue and 4oz of Purple Primer and a Modern Gray Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out...

This kit is a Diverter in a Kit which Includes a Modern Gray Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out an old Diverter and install this new Diverter in...

This part is a 3 3/4" Wide 2"slip x 2"slip x 2"slip Spa Diverter Complete Assembly Gray Valve.  The 2" Slip fittings receives a 2" pipe or fitting that would measures about 2 3/8" OD.. We also offer This Diverter in a Kit...

You are buying a Waterway Brand Flapper Tee Air Check Valve with a  1" Slip X 1" Slip Fittings on each end. This valve is used to allow air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. The...

These are now obsolete now click this link for the solution.. You will not need all of these parts but we can't get it without them: Lo-Pro Floor Drain, 3/4" Slip Barb Ell, Dark-Silver-Glitter, 3-1/2" Face Width This part is a Cal Spa Hot Tub...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...