Digital Electronic Topside Controls

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...

This part is a Circuit Board, Jacuzzi (Balboa), R574/R576R1, Value, 6 Pin Phone Cable..   Plug Connection - Phone Style Cable Chip Number - R574/R576R1(x) Circuit Board Application    JacuzziCircuit Board...

This part is a Ground Bar found on many Balboa Brand Spa Hot Tub packs as well as some Gecko SSpa and Mspa packs.

This part is a Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.  Note: This sensor does not have the nut and washer on it so it will only work with Jacuzzi Premium hot tubs..   Application Balboa...

This part is a Complete VL-200 or Eco-200 topside that is used on some Balboa 4 button systems..  It features Jet, Temp, Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is 72" long.. Compatible with the...

This board fits H716 Duplex Digital circuit board by Balboa. 50920 is a replacement for Jacuzzi Spas.Replaces Jacuzzi Duplex&ndash digital 2-pump w/phone plug Circuit Board Application    JacuzziCircuit Board Model  ...

VL501S Keypad is manufactured for Leisure Bay Spas by Balboa Water Group. Will run 2 Pump Systems. Keypad is Rectangular w/Rounded Sides with LCD Display and measures 13.25" x 2.4". 6 button overlay included (Jets, Jets, Light, Temp+, Temp-). Comes with...

Replacement Cal Spa CS5100DVR1(x) circuit board made by Balboa. This generic circuit board replaces the original 55737, 54756, 56939 and ELE09907283. New models come with the Plug-N-Click connector on the heater terminals. You can remove this part and...

G-Series circuit board made by Balboa Water Group for Leisure Bay Spas. Original Processor number is LB501SR1A. Normally mates to plastic VS Series control box part number 54340(0x). This board will also replace the discontinued LB500S. Uses an 8 Pin...

  Daughter Board 2 (DB-2) Kit for Waterway NEO 2100 Spa Control System. Used to add (2) extra 2-Speed pumps to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie.     NOTE: WE DO NOT ACCEPT RETURNS...