1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends
    Add to Cart

    Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends

    MSRP: $28.99
    $18.99
    This Seal is a PS-3867 which is the Better - Viton Carbon Graphite version of the PS-200 Seal used Primarily in Aqua-Flo Wet Ends and Waterway "Viper" Wet Ends. It is 1 1/4" Across the back of the Spring Seal part that goes onto the Impeller and the...
    MSRP: $28.99
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $28.99
    $18.99
    Subtotal:
  • Split Nut, Pump, Union, Emergency Repair, 1 1/2" Threaded Only for Pumps This is an example of the Pump Union in place before the split nut then the split nut in place if the original union.. What happens is the union nut will crack an you would normally have to cut all of the plumbing and replace it but with this split nut you simply cut the old nut off and put this in place and you will not have to replace the plumbing parts..
    Add to Cart

    Split Nut, Pump, Union, Emergency Repair, 1 1/2" Threaded Only for Pumps

    MSRP: $13.99
    $10.99
    This part is a 1 1/2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 1 1/2" Pump Union. The Pump Union Split Nut that measures about 2 7/8" on the outside and mounts to the existing Pump Union Body using 2...
    MSRP: $13.99
    $10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $10.99
    Subtotal:
  • Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To
    Add to Cart

    Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To

    MSRP: $12.99
    $9.99
    This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet...
    MSRP: $12.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $9.99
    Subtotal:
  • 1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2" 1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2"
    Add to Cart

    1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2"

    MSRP: $7.99
    $4.99
    NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • Shaft Seal, PS-200, 5/8" Shaft, Buna Fits Aqua-Flo Wet Ends and more Shaft Seal, PS-200, 5/8" Shaft, Buna Fits Aqua-Flo Wet Ends and more
    Add to Cart

    Shaft Seal, PS-200, 5/8" Shaft, Buna Fits Aqua-Flo Wet Ends and more

    MSRP: $11.23
    $10.99
    You are buying a Kit that Features (1) PS-200 Seal for Aqua-Flo Pumps. This Seal is Used Primarily in Aqua-Flo Wetends but is found in some other brands like a Waterway "Viper*" Wet End. Pump Seal Assy 5/8"Shaft, 1.218"Seal O.D., 1.250"Seal O.D. The...
    MSRP: $11.23
    $10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $11.23
    $10.99
    Subtotal:
  • Total: items /

Adding your products to cart