Pump Wet Ends and Related Parts
Pump Wet Ends and Related Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Wet End, Vico, Ultima, 4.0hp, 2"mbt, 48fr, 4 Bolt
MSRP: $129.99$109.99This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 4.0HP impeller which would fit a motor that has 12.0-14.0 amps at 230V and there are no 115V motors this fits.. Pump to Motor...MSRP: $129.99$109.99 -
Complete Wet End, Aqua-Flo ,XP2, Xp2e,3.0HP, 2"x 2" , 48fr, fits Motors with 12.0A/230V
MSRP: $148.99$129.99This part is a Complete 3HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 12.0 Amps on High Speed on a 230V motor and...MSRP: $148.99$129.99 -
Wear Ring, fits AquaFlo, FMHP, FMCP, TMCP, pump impellers, 1 3/4" hole
MSRP: $10.99$8.99This part is a replacement wear ring found in 48 frame 1 1/2" Flo-Master "FMHP" Series Side Discharge and "FMCP" Center Discharge Spa Pumps.. The ring measures about 1 3/4" inside the wear ring and 2 3/16" at the widest part and about 3/4" tall....MSRP: $10.99$8.99 -
Impeller, Vico Ultima, Ultra Flo, 2.0hp, 10 Amps High Speed 230V or 16 Amps 115V
MSRP: $49.99$39.99Vico Ultima, Ultra Flo Pump Impeller for a 2HP Motor which would have an Amperage of around 10 Amps on High Speed... Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 2.0hp, it is used in an Ultima and/or Ultra Flo pump...MSRP: $49.99$39.99 -
MSRP: $2.83$2.20
-
Wear Ring, Waterway Executive 48 or 56 frame , 1.0, 2.0 or 3.0 HP
MSRP: $14.99$9.99This Wear Ring only fits Waterway Executive 1, 2, or 3HP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 1-1/16" thick from front to back... If you have a Waterway Executive 4 or 5 Horsepower Wet End it will require a different wear ring that...MSRP: $14.99$9.99 -
Complete Wet End, Aqua-Flo ,XP2, Xp2e, 2.5HP, 2"x 2" , 48fr, fits Motors with 11.0A/230V
MSRP: $148.99$129.99This part is a Complete 2.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 11.0 Amps on High Speed on a 230V motor and not...MSRP: $148.99$129.99 -
Seal Plate, Volute, Vico Ultima, 48 Frame
MSRP: $44.99$34.99Seal Plate for Vico Ultima pumps. Material Type PlasticVolute to Seal Plate Mounting Type 4 Bolts 4 NutsVolute to Seal Plate Hole Spacing 4-3/8"Seal Plate to Motor Mounting Type 48...MSRP: $44.99$34.99 -
Impeller, Waterway, HiFlo, Side Discharge, 3/4hp Hi-Flo, Hi Flo
MSRP: $46.99$37.99This item is a 3/4HP Waterway HiFlo Pump Impeller "B".. If Your motor is 115V the amperage would be about 11 Amp if 230V it would be about 7 amps..Closed face impeller made for the Hi-Flo side discharge pump by Waterway Plastics. Rated at...MSRP: $46.99$37.99 -
Impeller, Vico, Ultima, Ultra Jet, Flo,4.0hp,Black/Green/Red
MSRP: $39.99$34.99Vico Ultima Ultra Flo or Ultra Jet Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 4.0hp,which is between 12 and 14 Amps.. it is used in an Ultima, Ultra Jet and/or Ultra Flo pump wet end, and must be...MSRP: $39.99$34.99 -
XP2e 2.0 HP 2 5/8" Eye Impeller Aqua-Flo 230V 10 Amp or 115V 16 Amp
MSRP: $48.99$38.99This is a XP2e 2.0HP Impeller.. The Impeller has a 2 5/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps on High at 115V. See the links below for seals, bearing and other parts...MSRP: $48.99$38.99 -
Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP
MSRP: $44.99$34.99This is a .75HP or 3/4HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .75HP Motor that has about 7.0 Amps on High Speed at 230V and 7-8.0 Amps at 115V. This Impeller fits between the Face and the...MSRP: $44.99$34.99